Cut Paste; Cut Insert; Insert Silence - Akai DPS12 Operator's Manual

Chapter 8: Edit technique
CUT
This command enables you to cut (delete) data between the IN point and OUT point, and paste the data after the
NOW point. Silence will be created between the IN and OUT point, and the existing data in the destination will be
overwritten.
FROM track
TO track
NOTE :
of "COPY
TIP :
Repeat times:
CUT
This command enables you to cut data between the IN and OUT points and insert it after the NOW point. The
source data between the IN and OUT point will be replaced with silence, and the existing data in the destination
after the NOW point will move forward in time.
FROM track
TO track
NOTE :
under the heading "COPY
TIP :
Repeat times:

INSERT SILENCE

This command enables you to insert silent data after the NOW point. The existing data after the NOW point will
move forward by the time duration of the inserted silence. The time duration of the silence is set in the Insert
time field. Move the cursor to this field, and press the
dial to set the value.
EDIT track
84
PASTE
IN point OUT point
You may select multiple tracks as FROM tracks and TO tracks respectively. Refer to the NOTE
PASTE" on page 82 for more information.
You may repeatedly insert the cut data after the NOW point, if necessary. Move the cursor to the
field and turn the
INSERT
IN point OUT point
You may select multiple tracks as FROM tracks and TO tracks respectively. Refer to the NOTE
PASTE" on page 82 for more information.
You may repeatedly insert the cut data after the NOW point, if necessary. Move the cursor to the
field and turn the
NOW point
INSERT SILENCE
CUT PASTE
NOW point
dial to specify the number of repeat operations.
[JOG]
CUT INSERT
NOW point
[JOG] dial to specify the number of repeat operations.
[NUMBER/NAME]
IN point OUT point
Silence
The data is overwritten.
NOW point
IN point OUT point
Silence
NOW point
key to enter a value, or turn the
NOW point
The data movesforward.
Silence
Insert time
The data moves
forward.
[JOG]