Expander (I); Noise Gate (I); Digital Eq (I) - Akai DPS12 Operator's Manual

EXPANDER (I)

This effect expands (boosts) signals with a certain level or lower and broadens the dynamic range.
1
B
3
Parameter
1 Thresh –60dB – 0dB
2 Ratio 1:2 – 1:100
3 Output –24dB – +24dB
4 Att 0 – 127
5 Rel 0 – 127
6 Hold 0 – 127

NOISE GATE (I)

This dynamic effect mutes signals at a certain level or lower. This is useful for cutting noise during silent parts of
a performance.
1
B
3
Parameter
1 Thresh –60dB – 0dB
2 key AUX-A/AUX-B
3 Output –24dB – +24dB
4 Att 0 – 127
5 Rel 0 – 127
6 Hold 0 – 127

DIGITAL EQ (I)

This is a three-band parametric equalizer. Pressing the
parameters.
1
B
3
Parameter
1 EQ 1 F 20 – 20kHz
2 EQ 2 F 20 – 20kHz
3 EQ 3 F 20 – 20kHz
4 G –18dB – +18dB
5 Q 0.5 – 10
6 Output –60dB – +24dB
7 EQ ON/OFF
Setting range
Adjusts the level at which the effect is enabled.
Adjusts the boosting ratio for signals that exceed the threshold value.
Adjusts the level of the effect sound.
Adjusts the attack time of the effect.
Adjusts the release time of the effect.
Adjusts the hold time of the effect.
Setting range
Adjusts the level at which the gate opens or closes.
Selects the source signal that triggers the gate to open or close (AUX
SEND A or AUX SEND B).
Adjusts the level of the effect sound.
Adjusts the attack time of the effect.
Adjusts the release time of the effect.
Adjusts the hold time of the effect.
4 5
Setting range
Sets a frequency for EQ1.
Sets a frequency for EQ2.
Sets a frequency for EQ3.
Set the level of EQ1–3.
Set the curve for EQ1–3.
Sets the level of the effect sound.
Switches EQ on and off.
4
5
6
Function
GATE
4
5
6
Key
Function
MORE BACK
/ [F6] key will switch between the screens of the
6
Function
Chapter 13: Using the effects
7
139