Moving To A Locate Point; Locating The Zero Position Of The Time Counter - Akai DPS12 Operator's Manual

Moving to a locate point

You can recall a locate point stored in the locate list to locate a point. Use the
point.
1. Press the [GO TO] key while the DPS12 is stopped.
NOTE : The [GO TO]
The LOCATE LIST window appears.
1 This select field indicates the locate function to be executed.
2 This select field indicates the locate list. Use the
down the list.
2. Use the [CURSOR]q/u keys to select a desired locate point from the list.
DO IT
3. Press the [F5] key.
The DPS12 locates the selected locate point and the window is closed.
CANCEL
* Press the
TIP : Press the [CURSOR]
Select:
field.

Locating the zero position of the time counter

When the LOCATE LIST window is displayed, the DPS12 can also locate the zero position of the time counter
(zero return). If the time counter indicates the ABS value (absolute time value), the time position at the top of the
Project is located. If the time counter indicates the REL value (relative time value), the DPS12 locates the zero
position of the relative time.
1. Press the [GO TO] key while the DPS12 is stopped.
LOCATE LIST
The
0 RTN
2. Press the [F3] key.
The DPS12 locates the zero position of the time counter and the window closes.
key is disabled except in Main mode, Track View mode, and Mixer mode.
key to cancel the locate operation.
[F2]
w/s keys while the cursor is within the list to move the cursor to the
window appears.
Chapter 3: Transport/Locate operation
[GO TO]
LOCATE
GO TO MEMORY
[GO TO] key
q/u keys or the
[CURSOR]
key to recall a stored locate
A
B
dial to scroll up and
[JOG]
43