Tape Echo (G); Reverb>Small Room (Small Room Reverb) (G); Reverb>Big Room (Big Room Reverb) (G) - Akai DPS12 Operator's Manual

Chapter 13: Using the effects
Parameter
1 LDelay
2 Fdback
3 HFdamp
4 RDelay
5 Width

TAPE ECHO (G)

This delay effect simulates a three-head tape echo machine. You can set three delay times individually.
1
B
3
Parameter
1 Head1
2 Head2
3 Head3
4 Fdback
5 HFdamp
6 Pan
REVERB>SMALL ROOM (Small Room Reverb) (G)
This reverb effect simulates reverberations in a small room.
1
B
3
Parameter
1 Pre-D
2 Time
3 Diff
4 HFdamp
5 Width
REVERB>BIG ROOM (Big Room Reverb) (G)
This reverb effect simulates reverberations in a big room.
1
B
3
136
Setting range
1 – 1500ms Adjusts the delay time of the L channel.
0 – 127 Adjusts the amount of delay that is fed back.
20Hz – 20kHz Sets a frequency at which the higher range of the feedback sound is cut.
1 – 1500ms Adjusts the delay time of the R channel.
0 – 127 Adjusts the width and spread of the stereo image.
Setting range
1 – 1500ms Adjusts the delay time of Delay1.
1 – 1500ms Adjusts the delay time of Delay2.
1 – 1500ms Adjusts the delay time of Delay3.
0 – 127 Adjusts the amount of delay that is fed back.
20Hz – 20kHz Sets a frequency at which the higher range of the feedback sound is cut.
L63 – MID – R63 Adjusts the stereo image of the effect sound.
Setting range
1 – 100ms Adjusts the delay time of early reflections.
0.1 – 10sec Adjusts the time of attenuation of reverberation.
0 – 127 Adjusts the density of reverberation.
20Hz – 20kHz Adjusts a high-frequency damp (the high range is attenuated) of reverbera-
tion.
0 – 127 Adjusts the width and spread of the stereo image.
Function
4
5
6
Function
4
5
Function
4
5