Track View Screen - Akai DPS12 Operator's Manual

Chapter 2: Recording on the DPS12
Level meters when TRACK is selected
1 12
• –
LR
• ............................ Output level of master L/R
6 Function display
The names of the functions appear on the bottom of the screen. The
INPUT level meters/TRACK level meters, and the

TRACK VIEW screen

Pressing the
[TRACK VIEW]
VIEW mode, and the TRACK VIEW screen will appear. In this screen, data in each track is represented by a bar
graph, if any, and the range between the IN point and the OUT point (used to specify the range for the Auto Punch
In/Out operation or the edit functions) is highlighted. This screen is useful when you mark the Auto Punch In/Out
points or specify the range for editing.
1 NOW: field
This time field indicates the current position. You can also enter the time directly.
2 Bar graph
If a track contains data, it is represented by a bar graph. Any recorded area (even if it is a silence) is repre-
sented by a bar graph.
3 IN point/OUT point range
The range between the IN point and the OUT point is highlighted.
4 Level meters
These are the same level meters as those that appear in the MAIN screen.
5 Function display
The names of the functions appear on the bottom of the screen. The
between the INPUT level meters and TRACK level meters, and the
in and out on the bar graphs.
6 Now point
This vertical line indicates the position currently shown in the NOW field.
26
Maximum (clipping)
Already recorded
tracks
..................... Output level of tracks 1–12
key while the MAIN screen is displayed will cause the DPS12 to enter TRACK
D
E
[F1]
key – key are used to recall the Control Panel.
[F3] [F6]
A
F
[F1]
[F5]
key/ [F2] key are used to switching the
C
B
key and [F2] key are used to switch
key and the key are used to zoom
[F6]