Rotary Speaker (I); Auto Pan (I) - Akai DPS12 Operator's Manual

ROTARY SPEAKER (I)

This effect simulates rotary speakers. Use external MIDI Control Change messages or the function key on the
DPS12 to switch between two rotation speeds (Rate1/Rate2).
When the DPS12 receives a specified Control Change message,
Rate2
63, and is selected if the value falls between 64 and 127. Pressing the
Rate1 Rate2
between and
1
B
3
Parameter
1 Rate1 0.1Hz – 10Hz
2 Rate2 0.1Hz – 10Hz
3 Accel 0.1sec – 10sec
4 Init R1/R2
5 MIDI ch 1 – 16
6 Ctrl No. 0 – 127
To avoid possible confusion, it is recommended that you select a different MIDI receive channel for
NOTE :
Control Change messages to control mix parameters (see page 116) and for Control Change messages for this
type of effect.

AUTO PAN (I)

This auto pan effect enables you to adjust the rotation and depth of rotation.
1
B
Parameter
1 Rate 0.1Hz – 10.0Hz
2 Mode Pan
L>R
R>L
3 Width 0 – 127
.
Setting range
Adjusts the rotation speed (Rate1) of the speakers.
Adjusts the rotation speed (Rate2) of the speakers.
Adjusts the time (duration) taken for switching from Rate 1 to Rate 2.
Sets the initial rotation speed (Rate1/Rate2).
Selects a MIDI channel that receives Control Change messages.
Sets a Control Change number to be received.
Setting range
Adjusts the speed of panning.
A common auto pan.
Simulates a sound source that rotates counter-
clockwise and is listened to from in front.
Simulates a sound source that rotates clockwise
and is listened to from in front.
Adjusts the panning width.
Rate1
is selected if the value falls between 0 and
MANUAL
4
5
6
Function
autopan
3
LFO
Function
Chapter 13: Using the effects
[F6] key will toggle
L
L
L
R
R
R
133