Using A Removable Drive - Akai DPS12 Operator's Manual

Chapter 11: Using a disk
4. Select FORMAT (or ERASE ) in the Format operation field.
5. Press the
6. Press the
After formatting or erasing the destination disk, the copy operation is executed. When the operation is com-
plete, the DPS12 returns to the DISK SETUP screen.
TIP :
NOTE :
• Make sure that the available space of the destination disk is larger than the size of the copy data. If it is
smaller, an error message appears indicating that you cannot execute the copy operation. Also, you
cannot copy two or more disks at a time, even if you specify a copy destination disk that has a large free
space.
• Once the FORMAT operation is started, the function will not be canceled until the Format operation is
finished.

Using a removable drive

1 If a removable drive is connected, but the disk is not inserted,
REC READY
inserted,
2 Pressing the
108
DO IT
[F5] key. The following window appears to confirm the operation.
DO IT
[F5] key.
CANCEL
Press the key to cancel the operation.
[F2]
NOW SELECTED
or
EJECT
key will eject a removable disk from the drive.
[F6]
REC NOT READY
appears.
A
B
appears. If the disk is