Displaying All Eq Parameters Of A Given Channel (Strip); Aux Send Settings; When "2 Mono" Is Selected; Send Level Setting (Aux Send-A(B)) - Akai DPS12 Operator's Manual

Chapter 6: Mixer Function

Displaying all EQ parameters of a given channel (STRIP)

You can display on the screen a set of all EQ-related parameters of a given channel. This is called "EQ STRIP."
This function is useful when you wish to focus on controlling the EQ of a single channel. When one of the EQ
parameters is selected, press the
This screen is an EQ strip for the 3-band EQ.
*
The EQ strip screen has the following information:
1 This graphical field enables you to adjust the EQ parameters.
2 This field shows the value of the EQ parameters.
3 This field indicates the current channel. To select another channel, move the cursor to this field and turn the
dial. If you have selected multiple channels using the
[JOG]
channel number.
4 This field indicates the on/off status of the EQ.
5 Pressing the ON/OFF toggles the EQ on and off.
6 Pressing the
To adjust the parameters in the EQ strip, use the
and turn the
[JOG]

AUX send settings

The DPS12 provides a two-channel AUX send. You can set the SETUP:
the AUX send signals are two-channel monaural signals (
parameters that appear vary depending on the

When "2 MONO" is selected:

Send level setting (AUX SEND-A(B))

This parameter enables you to adjust the level of the signal routed from each channel to AUX send A (AUX
SEND-A or B), and the master level of the send A (B) signal (SEND MASTER).
Range: 0–127
When TRACK MIX channels are selected
The signal sent from each channel to AUX send A (B) is routed to the SEND A (B) MASTER parameter and
output from the AUX SEND A (B) jacks. The same signal is also sent to effect A (B).
TIP :
64
STRIP
C
CLOSE
[F6] key closes the EQ strip screen and returns you to the previous screen.
dial to change the value.
Refer to Chapter 13 (page 119) for more information on the optional internal effects.
key. The following EQ strip screen appears.
[F6]
D E
[CHANNEL SELECT]
[CURSOR] key to move the cursor to the desired parameter field,
2 MONO
AUX type
setting.
When THRU MIX channels are selected
A
B
F
keys, "*" appears next to the
AUX type
parameter to select whether
) or a pair of stereo signals (
STEREO
). The