Akai DPS12 Operator's Manual page 72

Chapter 6: Mixer Function
If you press multiple
once.
Example: TRACK MIX channels 3 and 4 are selected.
TIPS :
• You can use the
using the
multiple channels simultaneously.
• You cannot use the
screen), MASTER SEND B (AUX SEND-B screen) parameter, and MASTER PARAMETER (LEVEL
screen). Use the
3. Use the
Pressing the
upward.
Example: The parameter
TIP :
dial to select the desired parameter.
4. Turn the [JOG] dial to adjust the parameter value.
The selected channel parameter will change.
Example: The EQ HIGH FREQ parameter for TRACK MIX channel 2 is changed to
TIP :
eter values for the multiple channels simultaneously.
60
[CHANNEL SELECT]
[CURSOR] key to move the cursor to the graphical field of a desired channel, instead of
[CHANNEL SELECT]
[CHANNEL SELECT]
[CURSOR] key to move the cursor to the desired parameter.
SELECT SELECT
†[F3] key/
key scrolls the parameters downward, and pressing the
[F3]
EQ HIGH FREQ
currently-selected TRACK MIX channel 2.
You can also use the
[CURSOR]
If you selected multiple channels in Step 2 above, you can use the
keys simultaneously, you can select the corresponding channels at
key to select the channel. However, in this case you cannot select
keys to select the MASTER SEND A parameter (AUX SEND-A
π[F4] key to select a mix parameter.
is selected. This parameter has been set to
key to move the cursor to the
key scrolls the parameters
[F4]
10.2K
Select:
field, then turn the
.
12.5K
dial to adjust the param-
[JOG]
for the
[JOG]