Setting The Level (Eq High/Mid/Low Level); Setting The Band Width (Eq Mid Width) - Akai DPS12 Operator's Manual

While this screen is displayed, the
ON/OFF
•
[F5] key
STRIP
• ........ displays all the EQ parameters for the selected channel. See page 64 for more
[F6] key

Setting the level (EQ HIGH/MID/LOW LEVEL)

The EQ LEVEL parameters determines the level of each range for each channel.
Range: –12dB – 0 – +12dB
When TRACK MIX channels are selected
While this screen is displayed, the
ON/OFF
•
[F5] key
STRIP
• [F6] key ........ displays all the EQ parameters for the selected channel. See page 64 for more
NOTE : When the 2-band EQ is selected, the EQ MID LEVEL parameter does not appear.

Setting the band width (EQ MID WIDTH)

The EQ MID WIDTH parameter determines the band width of the mid-range for each channel.
Range: 0.5 – 16
When TRACK MIX channels are selected
While this screen is displayed, the
ON/OFF
• [F5] key
STRIP
• ........ displays all the EQ parameters for the selected channel. See page 64 for more
[F6] key
When the 2-band EQ is selected, the EQ MID WIDTH parameter does not appear.
NOTE :
[F5] key and the
.... switches EQ on/off for the selected channel. To check the on/off status of the selected
channel EQ, select the EQ ON/OFF parameter (see page 62).
information.
key and the
[F5]
.... switches EQ on/off for the selected channel. To check the on/off status of the selected
channel EQ, select the EQ ON/OFF parameter (see page 62).
information.
key and the
[F5]
.... switches EQ on/off for the selected channel. To check the on/off status of the selected
channel EQ, select the EQ ON/OFF parameter (see page 62).
information.
[F6] key function as follows:
When THRU MIX channels are selected
key function as follows:
[F6]
When THRU MIX channels are selected
key function as follows:
[F6]
Chapter 6: Mixer Function
63