Track Erase Function - Akai DPS12 Operator's Manual

3. To name a virtual track, move the cursor to the character field of the virtual track you wish to name,
then press the [NUMBER/NAME] key.
An underline appears at the top of the character field in which you can enter a name.
4. Use the [JOG] dial or the keys on the top panel to enter a name for this virtual track.
Refer to page 18, 19 for information on entering characters.
After entering characters, press the
NOTES :
• When the DPS12 is set to default, virtual tracks 1–12 are assigned to physical tracks 1–12.
• You cannot assign a single virtual track to multiple physical tracks. For example, if virtual track 1 has
already been assigned to physical track 1, you cannot assign virtual track 1 to another physical track. If you
wish to assign virtual track 1 to another physical track, first assign another virtual track to physical track 1.

TRACK ERASE function

You may erase the contents of a whole track selected.
1. While the ASSIGN VIRTUAL TRACK screen is displayed, move the cursor to the virtual track you want
to erase and press the
The following window appears.
DO IT
2. Press the [F5] key.
The whole contents of the selected track will be erased. Press the
CAUTION : Once the track data is erased, it cannot be recovered (No UNDO). Use extra caution when
you use this TRACK ERASE function.
[NUMBER/NAME]
ERASE
[F6] key.
Chapter 5: Assigning Input Signals and Virtual Tracks
key to confirm the name.
CANCEL
[ F2 ] key to cancel the operation.
57