SELECT
2. Press the
The SELECT DISK window appears.
Example: A drive with the SCSI ID number 3 is selected as the current drive.
DO IT
3. Press the
[F5] key.
SCSI ID=3
The device with
NOTES :
• When the current drive is changed, the first Project in the Project list stored in the new current drive is
automatically recalled.
• If you select a drive that does not have the
Viewing the drive information
You may view the type, manufacturer, used space, and available space of the connected drive. Follow the steps
below.
1. While the DISK SETUP screen is displayed, move the cursor to the SCSI ID number of the drive whose
data you wish to review.
NOTE :
You cannot view the information of a drive that is not connected.
INFORM
2. Press the
The DISK INFORMATION window appears. This window is only for display purposes. You cannot change
any parameters.
The following information is included in this window.
Device
= (device name)
1
This field indicates the type of the drive.
Vendor
= (manufacturer)
2
This field indicates the name of the drive manufacturer.
Ver.=
3
(version number)
This field indicates the version number of the drive.
Used
(used space)
4
=
These fields indicate the amount of used and available space.
CLOSE
3. Press the
The DPS12 returns to the DISK SETUP screen.
[F4] key.
becomes the current drive, and the DPS12 returns to the DISK SETUP screen.
[F1] key.
Free=
(available space)
[F2] key to close the window.
REC READY
indication, the DPS12 displays an error.
Chapter 11: Using a disk
A
B
C
D
105