Gas Supply Requirements; Gas Connection - Waldorf RN8510GE Installation And Operation Manual

Specifications

Gas Supply Requirements

- Australia:
Input Rate (N.H.G.C.)
- each Open Burner
- each 300mm Griddle Section
Supply Pressure
Burner Operating Pressure (*)

Gas Connection

- New Zealand:
Input Rate (N.H.G.C.)
- each Open Burner
- each 300mm Griddle Section
Supply Pressure
Burner Operating Pressure (*)
Gas Connection
- UK Only:
Category:
Flue Type:
Nominal
Heat Input (nett)
Reduced
Nominal
Gas Rate (nett)
Reduced
Supply Pressure
Burner Operating Pressure (*)
Gas Connection
*
Measure burner operating pressure at manifold test point with two burners operating at full
setting. Operating pressure is ex-factory set through the appliance regulator and is not to be
adjusted, apart from when carrying out gas conversion, if required.
Conversion' section for details).
Natural Gas
28 MJ/hr
21 MJ/hr
1.13 - 3.40 kPa
0.95 kPa
Natural Gas
28 MJ/hr
21 MJ/hr
1.13 - 3.40 kPa
0.95 kPa
II
(20, 37).
2H3P
A
1.
Natural Gas (G20)
Open Burner Griddle
(each) (each 300mm section)
6.5 kW 5.5 kW
1.75 kW 1.85 kW
3
0.69 m /hr 0.58 m
3
0.19 m /hr 0.20 m
20 mbar
9.5 mbar
4
LP Gas (Propane)
28 MJ/hr
21 MJ/hr
2.75 - 4.50 kPa
2.6 kPa
3
/ " B.S.P. Male
4
LP Gas
28 MJ/hr
21 MJ/hr
2.75 - 4.50 kPa
2.6 kPa
3
/ " B.S.P. Male
4
Propane (G31)
Open Burner
(each)
6.5 kW
1.75 kW
3
/hr 0.51 kg/hr
3
/hr 0.14 kg/hr
30 / 37 mbar
3
/ " B.S.P. Male
4
Griddle
(each 300mm section)
5.5 kW
1.95 kW
0.43 kg/hr
0.15 kg/hr
26 mbar
(Refer to 'Gas