Table of Contents
Advertisement
User instructions
Options Menu
The "Options" menu allows the user to customize to his/her personal preferen-
ce and location.
OSD Language
Select the appropriate language.
Time Offset
Local time can be adjusted within +/- 12 hours referring to UTC.
For your reference, when you adjust the time, the name of cities in the same time zone will be shown at the bottom of screen.
Summer Time
Summer Time can be set to "ON" or "OFF" depending on your location and season of a year.
LNB Power
LNB power can be switched "ON" or "OFF" depending on the installation the receiver is used in.
Screen Format
Screen Ratio can be changed from "4 : 3 " to " 1 6 : 9" as per the preference of the user.
If 4:3 has been selected, all the programs will be seen according to this.
If 16:9 has been selected, the screen format will be automatically adjusted according to the program being viewed.
Video Output
Two video output modes are supported: "CVBS" and "RGB".
TV Type
Three monitor types are supported: "PAL", "NTSC" and "PAL & NTSC".
UHF Standard
You can select the PAL output type for the RF modulator. Types are: "PAL G", "PAL I", "PAL K" and "NTSC M".
UHF Channel
You can select a RF channel ranging from "21" to "69" (14 to 83 "USA Channel"), through the PLL type RF modulator for
tuning terrestrial TV channel. The default channel of the receiver is "40".
21
"RSD - 7255"
OSD Language
English
Time Offset
+1:00
Summer Time
ON
LNB Power
ON
Screen Format
4:3
Video Output
CVBS
TV Type
PAL
UHF Standard
PAL G
UHF Channel
NO. 40
ENG. GER. SPA. FRE. POR. ARB.
Advertisement
Table of Contents
