Televes RSD-7115 User Manual page 49

User Manual
- Searching for channels: If you want to tune in on a channel and can
not remember its position you can carry out a search by name. To do
this, press button 3.
On the keyboard appearing on the screen type in the name of the
channel. As you type the name, the number of channels on the list will
progressively reduce. When the name of the desired channel appears
on the list, place your cursor on the "OK" option and click the OK
button.
On the "Found Channels" list, select the channel and lastly press the
OK button to view it.
To leave the menu, press the EXIT button.
- Organizing the channels: The channel list may appear organized by
different criteria. These are: "Default" (original configuration), "FTA/S",
"Lock", "Name (A-Z)" and "Name (Z-A)".
For the purpose, press button 4, and on the popup menu, select one of
the organizing criteria, using the CH /CH
The list will be shown organized according to the option selected.
Press the EXIT button to leave the menu. A confirmation message will
appear enabling you to save (YES) or reject (NO) the changes.
- Editing the channels: This option enables you to edit the channel list
in detail.
For the purpose, press button 5. You will be asked for your password
to access the following sub-menu.
- Erasing Channels:
To erase a channel, click button 1 on the selected channel. This
will mark it with an ( ). You can select several channels to be era-
sed in one operation by clicking button 1 on each in turn. If you
click the button on a selected channel again, the mark will be eli-
minated and the channel will not be erased.
To suppress all the channels at one stroke, press button 6, and all
the channels will be marked.
To erase the channels that have been marked, press the EXIT
button.
Whether you wish to erase one, several or all the channels, a new
window will appear asking you to confirm the decision to erase
(YES) or to leave the erasure menu without making any changes
(NO).
- Omitting (skipping) channels:
To omit a channel, click button 2 on the selected channel. This will
mark it with a (
channel again, the mark will be eliminated and the channel will not
be omitted.
Press the EXIT button to leave the menu. A confirmation message
will appear enabling you to save (YES) or reject (NO) the changes.
buttons, and press OK.
) symbol. If you click the button on a selected
49
"RSD - 7115"