Omr Mark Options; Present Or Absent; Increment Or Decrement - Pitney Bowes DI500 Operator's Manual

5 • Optical Mark Recognition (OMR)
TM - Timing
This mark is needed by some other machines to read OMR marks
correctly. This machine does NOT need Tmng marks, but the
mark(s) may be left within an existing code and will add integrity to
your Mail Piece.
Timing mark(s) may appear more than once within the code and, if
used, must always be present within the code.
IGN - Ignore
This feature is used to gnore a mark(s) wthn the code. It may be
used more than once within the code.
This can be useful to enable existing codes from other equipment to
be used, as certain marks might not be applicable to this machine.

OMR Mark Options

This section gives brief descriptions of the OMR Mark Options that
can be allocated to relevant OMR marks. The previous section, OMR
Marks Avalable on page 5-3 lists which options can be selected with
each mark.

Present or Absent

When Present the machine will act upon scanning the relevant
mark.
When Absent the machine will act upon NOT scanning the relevant
mark.

Increment or Decrement

When choosing Increment the relevant code's binary value will
ncrease.
If you choose to use Decrement, the relevant code's binary value
will decrease.
Random
This option is available for Match Code only, and when selected the
code's binary value changes n a random order. It can even be the
same bnary value as the previous Mail Piece.
5-6 SV40221 Rev. C