Fold Type And Overall Thickness Limits - Pitney Bowes DI500 Operator's Manual

Fold Type and Overall Thickness Limits

The table below shows the maximum number of sheets up to 12"
(305mm) in length that can be accumulated or collated for each fold
type, based on different weights of paper.
It is important that jobs exceeding these maximums are NOT
programmed into the machine or imposed by OMR code
printing and/or OMR selective feed.
Number of
sheets
1
2
3
4
5
6
7
8
9
10
Fold Types: C = C Fold, Z = Z Fold, S = Single Fold, D = Double Fold
Sheets above 14" (357mm) in length can only be folded using
double fold, up to 5 sheets.
All the above sheet limits can be used with Inserts from
feeders F and G only if the total Mail Piece contents are up to a
maximum of 1/8" (3mm) total compressed thickness.
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT
NOTIFICATION AND ARE SUBJECT TO TEST
SV40221 Rev. C
Paper Weights in lbs.
16, 18, 20
C,Z,S,D
C,Z,S,D
C,Z,S,D
C,Z,S,D
C,Z,S,D
S,D
S
S
S
S
Reference • 7
22, 24, 26
C,Z,S,D
C,Z,S,D
C,Z,S,D
C,Z,S,D
D
D
For applications within this
shaded area, contact your
machine supplier for advice.
28, 30, 32
C,Z,S,D
C,Z,S
C,Z,S
7-3