Sew A Button - Kenmore 19501 Owner's Manual

Sewa Button
Set the Machine
5-_Z_tSI_uJ 7D
@@D
oCE @DD@D
@D
7"
Stitch width controf
button
Press
B: Transparen_
buttonhole
fooI
Darning piate
Thread tenston
3to 7
$
Left hoie
...... J
Right hole
Use the darning plate for button sewing (see p. 36). 5.
1. Match the button holes to the horizontal slot
on the presser foot,
6.
2. Lower the foot to hold the button in place,
7.
3, Turn the hand wheel by hand until the needle
point is itust above the button.
8.
4, Press the stitch wtdth button (+ or -) so the
needle will enter the left hole of the button,
Draw thread to
reverse side of
fabric
............................. J
Turn the hand wheel so the needle will enter
the right hole of the button. Readjust the
stitch width if necessary.
Stitch several times.
After you finish sewing, cut the thread but
leave 3 to 4 inches of thread at the button.
Draw the thread to the reverse side of the
fabric and knot the threads.
39