Sew A Button - Kenmore 385. 17922 Owner's Manual

•
Sew a Button
Set the Machine
Stitch width control
Top thread tension
controt 2 to 6
A:
Stitch length contro_
Any number (not
necesSary to adjust)
2
Stretch Stitch
Zigzag foot
Drop feed lever
Drop the feed dogs (see page 38),
1, Match the center of the button holes to the center of the slot on the presser
foot.
2. Adjust the stitch width so that needle will drop in each hole.
3. Lower the foot to hold the button in place.
Turn the hand wheel by hand so that needle will enter either hole of the
button.
4, Stitch several t_mes.
To strength the shank, cutthe threads
leaving a 8" tail. Bring the needle
thread down through the hole in the
button and w_nd it around the shank,
Draw the thread to the bottom side
and knot.
When finished, raise the feed dogs
(see page 38).
40