Lexmark XM7100 Series User Manual page 309

Troubleshooting
Printer and toner cartridge regions
Region number
0
1
2
3
4
5
9
Notes:
• The x and y values represent .xy in the code that appears on the printer control panel.
•
The x and y values must match for printing to continue.
Replace imaging unit, 0 estimated pages remain [84.xy]
Replace the imaging unit to clear the message and continue printing. For more information, see the instruction sheet
that came with the supply or see the "Replacing supplies" section of the User's Guide.
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.
Replace jammed originals if restarting job.
Try one or more of the following:
•
Touch Cancel job to clear the message and cancel the scan job.
•
Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
• Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
• Touch Finish job without further scanning to end the last successful scan job.
•
Touch Restart job to restart the scan job with the same settings from the previous scan job.
Replace last scanned page and jammed originals if restarting job.
Try one or more of the following:
•
Touch Cancel job to clear the message and cancel the scan job.
•
Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
•
Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
• Touch Finish job without further scanning to end the last successful scan job.
•
Touch Restart job to restart the scan job with the same settings from the previous scan job.
Region
Global
United States, Canada
European Economic Area (EEA), Switzerland
Asia Pacific, Australia, New Zealand
Latin America
Africa, Middle East, rest of Europe
Invalid
309