Lexmark XM7100 Series User Manual page 301

Troubleshooting
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.
• Reset active bin
Install duplex
Try one or more of the following:
•
Install the duplex unit:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Install the duplex unit.
4
Connect the power cord to a properly grounded electrical outlet.
5
Restart the printer.
• Cancel the current job.
•
Reset the active bin.
Install Tray [x]
Try one or more of the following:
• Install the specified tray:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Install the specified tray.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.
•
Reset the active bin.
Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:
•
From the printer control panel, touch Continue to stop the defragmentation and continue printing.
•
Delete fonts, macros, and other data in the printer memory.
•
Install additional printer memory.
Insufficient memory to collate job [37]
Try one or more of the following:
•
From the printer control panel, touch Continue to print the part of the job already stored and begin collating the
rest of the print job.
•
Cancel the current print job.
301