Lexmark XM7100 Series User Manual page 194

Understanding the printer menus
Use
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Jam Assist
On
Off
Print Recovery
Page Protect
Off
On
Press Sleep Button
Do Nothing
Sleep
Hibernate
To
Specify whether the printer reprints jammed pages.
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
•
On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
Set the printer to automatically check for jammed paper.
Note: On is the factory default setting.
Let the printer successfully print a page that may not have printed
otherwise.
Notes:
•
Off is the factory default setting. This prints a partial page
when there is not enough memory to print the whole page.
•
On sets the printer to process the whole page so that the
entire page prints.
Determine how the printer responds when pressing the Sleep
button when the printer is idle.
Notes:
•
Sleep is the factory default setting.
•
Sleep or Hibernate sets the printer to operate at a lower
power configuration.
•
If the printer is in Sleep Mode, then the display appears off
and the Sleep button turns amber.
•
Touch anywhere on the display or press a button on the
printer control panel to exit Sleep Mode.
•
If the printer is in Hibernate mode, then the display is
completely off and the Sleep button turns amber and is
blinking.
194