Chapter 38 Snmp Configuration; Snmp Configuration; Figure 304 Menu 22: Snmp Configuration; Table 195 Snmp Configuration Menu Fields - ZyXEL Communications ZyWall 70 User Manual

This chapter explains SNMP configuration menu 22.

38.1 SNMP Configuration

To configure SNMP, enter 22 from the main menu to display Menu 22 - SNMP
Configuration as shown next. The "community" for Get, Set and Trap fields is SNMP
terminology for password.

Figure 304 Menu 22: SNMP Configuration

The following table describes the SNMP configuration parameters.

Table 195 SNMP Configuration Menu Fields

FIELD
Get Community Type the Get community, which is the password for the incoming Get- and GetNext
Set Community
Trusted Host
Trap
Community

Chapter 38 SNMP Configuration

SNMP Configuration
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
requests from the management station.
Type the Set community, which is the password for incoming Set requests from the
management station.
If you enter a trusted host, your ZyWALL will only respond to SNMP messages from
this address. A blank (default) field means your ZyWALL will respond to all SNMP
messages it receives, regardless of source.
Type the Trap community, which is the password sent with each trap to the SNMP
manager.
C
H A P T E R
ZyWALL 70 User's Guide
3 8
509