Figure 40 Mac Address Filter; Table 33 Mac Address Filter - ZyXEL Communications ZyWall 70 User Manual

ZyWALL 70 User's Guide

Figure 40 MAC Address Filter

The following table describes the labels in this menu.

Table 33 MAC Address Filter

LABEL
Active
Association
#
User Name
MAC
Address
Apply
Reset
128
DESCRIPTION
Select or clear the check box to enable or disable MAC address filtering.
Enable MAC address filtering to have the router allow or deny access to wireless
stations based on MAC addresses. Disable MAC address filtering to have the router not
perform MAC filtering on the wireless stations.
Define the filter action for the list of MAC addresses in the MAC address filter table.
Select Deny to block access to the router, MAC addresses not listed will be allowed to
access the router. Select Allow to permit access to the router, MAC addresses not listed
will be denied access to the router.
This is the index number of the MAC address.
Enter a descriptive name for the MAC address.
Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the wireless stations that
are allowed or denied access to the ZyWALL in these address fields.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 6 Wireless LAN