This chapter discusses SNMP (Simple Network Management Protocol) for network management
8.1
About SNMP
Your ZyWALL supports SNMP agent functionality, which allows a manager station to manage and monitor
the ZyWALL through the network. Keep in mind that SNMP is only available if TCP/IP is configured on
your ZyWALL.
8.2
Configuring SNMP
To configure SNMP, enter 22 from the Main Menu to open Menu 22 - SNMP Configuration, as shown in
the figure below. The "community" for Get, Set and Trap fields is simply SNMP's terminology for
password.
SNMP
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Figure 8-1 Menu 22 - SNMP Configuration
ZyWALL 10 Internet Security Gateway
SNMP Configuration
Chapter 8
and monitoring.
8-1