Configuration File Upload; Figure 328 Telnet Into Menu 24.7.1: Upload System Firmware; Figure 329 Telnet Into Menu 24.7.2: System Maintenance - ZyXEL Communications ZyWall 70 User Manual

Figure 328 Telnet Into Menu 24.7.1: Upload System Firmware

40.5.2 Configuration File Upload

You see the following screen when you telnet into menu 24.7.2.

Figure 329 Telnet Into Menu 24.7.2: System Maintenance

To upload the firmware and the configuration file, follow these examples
Chapter 40 Firmware and Configuration File Maintenance
Menu 24.7.1 - System Maintenance - Upload System Firmware
To upload the system firmware, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type
"root" and SMT password as requested.
3. Type "put firmwarefilename ras" where "firmwarefilename"
is the name of your firmware upgrade file on your workstation
and "ras" is the remote file name on the system.
4. The system reboots automatically after a successful
firmware upload.
For details on FTP commands, please consult the documentation
of your FTP client program. For details on uploading system
firmware using TFTP (note that you must remain on this menu to
upload system firmware using TFTP), please see your manual.
Press ENTER to Exit:
Menu 24.7.2 - System Maintenance - Upload System Configuration
File
To upload the system configuration file, follow the procedure
below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type
"root" and SMT password as requested.
3. Type "put configurationfilename rom-0" where
"configurationfilename" is the name of your system
configuration file on your workstation, which will be
transferred to the "rom-0" file on the system.
4. The system reboots automatically after the upload system
configuration file process is complete.
For details on FTP commands, please consult the documentation
of your FTP client program. For details on uploading
configuration file using TFTP (note that you must remain on
this menu to upload configuration file using TFTP), please see
your manual.
Press ENTER to Exit:
ZyWALL 70 User's Guide
533