Chapter 32 Snmp Configuration; Snmp Configuration; Figure 32-1 Menu 22: Snmp Configuration; Table 32-1 Snmp Configuration Menu Fields - ZyXEL Communications ZyWall 10 User Manual

32.1 SNMP Configuration

To configure SNMP, enter 22 from the main menu to display Menu 22 - SNMP Configuration as shown
next. The "community" for Get, Set and Trap fields is SNMP terminology for password.
Press ENTER to Confirm or ESC to Cancel:
The following table describes the SNMP configuration parameters.
FIELD
Get Community Type the Get community, which is the password for the incoming
Get- and GetNext requests from the management station.
Set Community Type the Set community, which is the password for incoming Set
requests from the management station.
Trusted Host If you enter a trusted host, your ZyWALL will only respond to
SNMP messages from this address. A blank (default) field means
your ZyWALL will respond to all SNMP messages it receives,
regardless of source.
SNMP Configuration
This chapter explains SNMP configuration menu 22.
SNMP is only available if TCP/IP is configured.
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0

Figure 32-1 Menu 22: SNMP Configuration

Table 32-1 SNMP Configuration Menu Fields

ZyWALL 10~100 Series Internet Security Gateway
SNMP Configuration
DESCRIPTION
Chapter 32
EXAMPLE
Public
Public
0.0.0.0
32-1