Table 200 System Maintenance Menu Diagnostic - ZyXEL Communications ZyWall 70 User Manual

Table 200 System Maintenance Menu Diagnostic

FIELD
Ping Host
WAN DHCP Release
WAN DHCP Renewal
Internet Setup Test
Reboot System
WAN
Host IP Address
Enter the number of the selection you would like to perform or press [ESC] to cancel.
Chapter 39 System Information & Diagnosis
DESCRIPTION
Enter 1 to ping any machine (with an IP address) on your LAN or WAN. Enter
its IP address in the Host IP Address field below.
Enter 2 to release your WAN DHCP settings.
Enter 3 to renew your WAN DHCP settings.
Enter 4 to test the Internet setup. You can also test the Internet setup in
Menu 4 - Internet Access. Please refer to
details. This feature is only available for dial-up connections using PPPoE or
PPTP encapsulation.
Enter 11 to reboot the ZyWALL.
If you entered 2 or 3 in the Enter Menu Selection Number field, enter the
number of the WAN port in this field.
If you entered 1in the Enter Menu Selection Number field, then enter the IP
address of the computer you want to ping in this field.
ZyWALL 70 User's Guide
Chapter 30 on page 449 for more
521