ZyXEL Communications ZyWall 70 User Manual page 671

Table 245 Certificates Commands (continued)
COMMAND
ca_trusted
remote_trusted
Appendix O Certificates Commands
DESCRIPTION
replace_fact
ory
import <name>
export <name>
view <name>
verify <name>
[timeout]
delete <name>
list
rename <old name>
<new name>
crl_issuer <name>
[on|off]
import <name>
export <name>
view <name>
verify <name>
[timeout]
ZyWALL 70 User's Guide
Create a certificate using your device MAC
address that will be specific to this device. The
factory default certificate is a common default
certificate for all ZyWALL models.
Import the PEM-encoded certificate from stdin.
<name> specifies the name as which the
imported CA certificate is to be saved.
Export the PEM-encoded certificate to stdout for
user to copy and paste. <name> specifies the
name of the certificate to be exported.
View the information of the specified trusted CA
certificate. <name> specifies the name of the
certificate to be viewed.
Verify the certification path of the specified
trusted CA certificate. <name> specifies the
name of the certificate to be verified. [timeout]
specifies the timeout value in seconds
(optional). The default timeout value is 20
seconds.
Delete the specified trusted CA certificate.
<name> specifies the name of the certificate to
be deleted.
List all trusted CA certificate names and basic
information.
Rename the specified trusted CA certificate.
<old name> specifies the name of the certificate
to be renamed. <new name> specifies the new
name as which the certificate is to be saved.
Specify whether or not the specified CA issues
CRL. <name> specifies the name of the CA
certificate. [on|off] specifies whether or not the
CA issues CRL. If [on|off] is not specified, the
current crl_issuer status of the CA.
Import the PEM-encoded certificate from stdin.
<name> specifies the name as which the
imported remote host certificate is to be saved.
Export the PEM-encoded certificate to stdout for
user to copy and paste. <name> specifies the
name of the certificate to be exported.
View the information of the specified trusted
remote host certificate. <name> specifies the
name of the certificate to be viewed.
Verify the certification path of the specified
trusted remote host certificate. <name>
specifies the name of the certificate to be
verified. [timeout] specifies the timeout value in
seconds (optional). The default timeout value is
20 seconds.
671