Figure 150 Ip Static Route; Table 105 Ip Static Route - ZyXEL Communications ZyWall 70 User Manual

Internet security appliance

Hide thumbs Also See for ZyWall 70:

Table of Contents

ZyWALL 70 User's Guide

Note: The default route is disabled after you change the static WAN IP address to a

dynamic WAN IP address.

Figure 150 IP Static Route

The following table describes the labels in this screen.

This is the number of an individual static route.

This is the name that describes or identifies this route.

This field shows whether this static route is active (Yes) or not (No).

This parameter specifies the IP network address of the final destination. Routing is

always based on network number.

This is the IP address of the gateway. The gateway is a router or switch on the same

network segment as the device's LAN or WAN port. The gateway helps forward

packets to their destinations.

Select the radio button next to a static route index number and then click Edit to set

up a static route on the ZyWALL.

Select the radio button next to a static route index number and then click Delete to

remove a static route on the ZyWALL.

Chapter 18 Static Route