Power Connections; Dc Power Connector - Lynx C AD 3320 D Reference Manual

Reference Manual C AD 3320 D / C AD 3121 D Version1.1

Power Connections

If using the module in a stand-alone application
use the separate R PS 3001 E (for Europe) or R PS
3001 U (USA) power brick option or the R PS 3003-3
desk power supply

DC Power Connector

The MiniModule has a captive power lead fitted to
the module, with a male 5 pin locking bayonet
connector. This connection provides DC power
and also data connectivity to the module.
Connector wiring is shown below.
Data Connection
i2C-SDA (data)
i2C-SCL (clock)
Caution
!
Only use the optional LYNX R PS power
modules. Please make sure the brick is not
connected to the main supply when
making the DC power connection to the
module. Ensure the 5-pin power
connector is locked securely in place.
3
4
5
Male Connector
(view looking into connector from front)
Power Connection
2
1
GND
+ 5V
Page 13