Electrical Installation; Stand Alone Operation - Lynx C AD 3320 D Reference Manual

Reference Manual C AD 3320 D / C AD 3321 D Version 1.1

Electrical Installation.

Stand Alone Operation

The MiniModule requires the R PS 3001 power brick
option for stand-alone operation. Two versions are
available R PS 3001 E for European markets and R
PS 3001 U for the US markets or the R PS 3003-3 desk
power supply.
Please ensure you have the correct power option
for your region. The connection to the module is
made with a small 5-pin connector, which has a
twist bayonet securing system. Please make sure
the connection is solid and locked in place. A strain
relief is included within the module to prevent
excessive strain on the connection.
Signal connections should be made with care,
please ensure connections are correct and
compatible equipment is feeding / receiving the
signals from the module or damage can result.
!
!
Page 16
Caution. Only use the optional LYNX R PS
3001 power modules. Please make sure
the brick is not connected to the main
supply when making the DC power
connection to the module. Ensure the 5-
pin power connector is locked securely in
place.
Caution. Care needs to be taken when
using the module in this way, if it is not
physically secured. Keep the module
away from the floor to avoid the risk of
someone stepping or tripping on the unit,
and locate the unit away from excessive
sources of heat and any sources or
moisture.