Power Connections; Dc Power Connector - Lynx MiniModules 3000 Series Reference Manual

Reference Manual C DA 3000 Version 2.0

Power Connections

If using the module in a stand-alone application
use the separate R PS 3001 E (for Europe), R PS 3001
U (USA) power brick option, the R PS 3001-3 desk
power supply or the R PS 3004 desk power supply
for 4 MiniModules.

DC Power Connector

The MiniModule has a captive power lead fitted to
the module, with a male 5 pin locking bayonet
connector. This connection provides DC power
and also data connectivity to the module.
Connector wiring is shown below.
Data Connection
i2C-SDA (data)
i2C-SCL (clock)
!
Page 12
4
5
Male Connector
(view looking into connector from front)
Caution
Only use the optional LYNX R PS power
modules. Ensure the 5-pin power
connector is locked securely in place.
Power Connection
3
2
1
GND
+ 5V