Table of Contents
Advertisement
Reference Manual D AD 3260 Version1.1
Power Connections
If using the module in a stand-alone application
use the separate R PS 1 E (for Europe), R PS 1 U
(USA) power brick option, the desk power supply R
PS 3001-3 or the R PS 3004 desk power supply for 4
Minimodules
DC Power Connector
The MiniModule has a captive power lead fitted to
the module, with a male 5 pin locking bayonet
connector. This connection provides DC power
and also data connectivity to the module.
Connector wiring is shown below.
Data Connection
i2C-SDA (data)
i2C-SCL (clock)
!
Caution
Only use the optional LYNX R PS power modules.
Ensure the 5-pin power connector is locked securely
in place.
Page 10
3
4
5
Male Connector
(view looking into connector from front)
Power Connection
2
1
GND
+ 5V
Advertisement
Table of Contents
