Reference Manual C AD 5320 SB Version1.1
Connections
Audio Connections
The C AD 5320 SB CardModule is configured for
Weco connectors for analog audio inputs and 75
Ohm BNC connectors for the AES3-id digital
outputs. The Weco connectors should be wired as
indicated below. Please use high quality screened
cable to prevent the introduction of noise and
interference to the audio signals (twisted pair
suitable for balanced audio signals).
Audio Input Connections
Weco 3 pin connector
Figure 3 - Audio output connection detail
Page 10
Pin
Connection
Number
1
Positive (+)
2
GND
3
Negative (-)
1 2 3
Weco male connector
on module
Weco female
connector
(balanced)
1 2 3