Switch Settings - Lynx C AD 3320 D Reference Manual

Reference Manual C AD 3320 D / C AD 3321 D Version 1.1

Switch Settings

Below the switch settings for the 8-position dip-
switch are defined. Please refer to figure 2 for the
location of the switch.
NOTE. Settings made are applied to both input
channels.
Switch 1
1
2
3
4
Switch 2
1
2
3
4
Page 18
DIP Switch 1
OFF
ON
1 2 3 4
DIP Switch 2
OFF
ON
1 2 3 4
(Connector side)
Setting Function
ON Local Control enabled
OFF Local Control disabled
ON Select Sample range High (48KHz or 96KHz)
OFF Select Sample range Low (32KHz or 44.1KHz)
ON Sample Rate = 44.1KHz or 96KHz **
OFF Sample Rate = 32KHz or 48KHz **
ON Test tone ON
OFF Test tone OFF (normal)
Setting Function
ON Select FS 18dBu (EU - C AD 3320)
Select FS 24dBu (US - C AD 3321)
OFF Select Low FS range (12dBu or 15dBu) (EU)
Select Low FS range (15dBu or 18dBu) (US)
ON FS range = 15dBu (EU) *
FS range = 18dBu (US) *
OFF FS range = 12dBu (EU) *
FS range = 15dBu (US) *
ON Mute channel 1
OFF Normal operation
ON Mute channel 2
OFF Normal operation