Wan Connection Device - THOMSON TR-069 Configuration Manual

5.1

WAN Connection Device

WAN connection device
A WAN connection device can be created and configured as follows:
Creating a WAN connection
the ObjectName argument the value "InternetGatewayDevice.WANDevice.1.WANConnectionDevice.".
The AddObjectResponse
argument for example value "2".
Configuring the WAN connection
RPC (message 4 in preceding illustration) contains following name-value pairs in its ParameterList
argument:
Name
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.
WANDSLLinkConfig.LinkType
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.
WANDSLLinkConfig.DestinationAddress
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.
WANDSLLinkConfig.ATMEncapsulation
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.2.
WANDSLLinkConfig.Enable
Link type value
Following table shows the link type of a specific WAN connection:
WAN connection
PPPoE
IP
PPPoA
IPoA
E-DOC-CTC-20071119-0003 v1.0
device: the AddObject RPC
(message 3 in preceding illustration) contains for the InstanceNumber
device: to create and configure the ATM PVC, the
Link type
EoA
EoA
PPPoA
IPoA
5| WAN Connections
(message 1 in preceding illustration) contains for
Value
EoA, PPPoA or IPoA
See " Link type
8/35 (VP/VC)
LLC or VCMUX
1
SetParameterValues
value".
61