THOMSON TR-069 Configuration Manual page 104

6| Service Provisioning
Example: parameter values
For example, following parameter values can be used:
Creating a
argument the value "InternetGatewayDevice.Layer2Bridging.Bridge.".
The AddObjectResponse
argument for example value "3".
Configuring the
following name-value pairs in its ParameterList argument:
Name
InternetGatewayDevice.Layer2Bridging.Bridge.3.BridgeName
InternetGatewayDevice.Layer2Bridging.Bridge.3.VLANID
The parameters BridgeName and VLANID are mandatory. This means that the parameters
must be set before the Bridge object is internally created.
Retrieving bridge and interface
illustration) contains following ParameterNames argument:
Entry
1
2
Creating a
argument the value "InternetGatewayDevice.Layer2Bridging.Filter.".
The AddObjectResponse
argument for example value "12".
Configuring port VLAN
contains following name-value pairs in its ParameterList argument:
Name
InternetGatewayDevice.Layer2Bridging.Filter.12.FilterBridge-
Reference
InternetGatewayDevice.Layer2Bridging.Filter.12.FilterInterface
The parameters FilterBridgeReference and FilterInterface are mandatory. This means that the
parameters must be set before the Filter object is internally created.
Configuring default port
contains following name-value pair in its ParameterList argument:
Name
InternetGatewayDevice.Layer2Bridging.Filter.12.ExclusivityOrder
Create a marking: the
argument the value "InternetGatewayDevice.Layer2Bridging.Marking.".
The AddObjectResponse
argument for example value "1".
98
VLAN: the AddObject RPC
(message 3 in preceding illustration) contains for the InstanceNumber
VLAN: the SetParameterValues RPC
information: the
Value
InternetGatewayDevice.Layer2Bridging.Bridge.3.BridgeKey
InternetGatewayDevice.Layer2Bridging.AvailableInterface.
filter: the AddObject RPC (message 9 in preceding illustration) contains for the ObjectName
(message 11 in preceding illustration) contains for the InstanceNumber
membership: the
VID: the SetParameterValues RPC
AddObject RPC
(message 20 in preceding illustration) contains for the InstanceNumber
(message 1 in preceding illustration) contains for the ObjectName
(message 4 in preceding illustration) contains
GetParameterValues RPC
SetParameterValues RPC
(message 15 in preceding illustration)
(message 18 in preceding illustration) contains for the ObjectName
Value
video
2
(message 7 in preceding
(message 12 in preceding illustration)
Value
2 (= BridgeKey)
10001 (=
AvailableInterfaceKey)
Value
1
E-DOC-CTC-20071119-0003 v1.0