Cwmp Daemon Towards The Acs - THOMSON TR-069 Configuration Manual

2| Configuring CWMP on the Thomson Gateway
2.2.3

CWMP Daemon towards the ACS

Displaying configuration information
To obtain an overview of the CWMP daemon configuration towards the ACS, execute following command:
=>:cwmp server config
The parameters and their default values are displayed as follows:
ACS url
ACS username
ACS password
Parameter description
To modify the configuration of the CWMP daemon towards the ACS, execute the command
:cwmp server config
Url: this parameter specifies the HTTP URL of the ACS.
Username: this parameter defines the username for authentication of the Thomson Gateway at the ACS.
The ACS default username is <OUI> - <serial number>. This can be achieved using CLI environment
variable concatenation. To retrieve this information, execute the following commands:
=>:env get var=_OUI
000E50
=>:env get var=_PROD_SERIAL_NBR
CP0452JT03Y
Password: this parameter defines the password for authentication of the Thomson Gateway at the ACS.
24
: http://acs-server.com
: 000E50-CP0452JT03Y
: ********
and specify one or more of the following optional parameters:
E-DOC-CTC-20071119-0003 v1.0