THOMSON TR-069 Configuration Manual page 98

6| Service Provisioning
Configuring the
following name-value pairs in its ParameterList argument:
Name
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Username
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Password
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Interface
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Service
Creating a
argument the value "InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.Hostname.".
The AddObjectResponse
argument for example value "1".
Configuring the
following name-value pair in its ParameterList argument:
Name
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Hostname.1.Name
The parameter Name is mandatory. This means that the parameter must be set before the
Hostname object is internally created.
Activating the
following name-value pairs in its ParameterList argument:
Name
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Enable
92
client: the SetParameterValues RPC
host: the AddObject RPC (message 10 in preceding illustration) contains for the ObjectName
(message 12 in preceding illustration) contains for the InstanceNumber
host: the SetParameterValues RPC
client: the SetParameterValues RPC
(message 7 in preceding illustration) contains
Value
<username>
<password>
InternetGatewayDevice.
WANDevice.1.
WANConnectionDevice.1.
WANPPPConnection.1
InternetGatewayDevice.
Services.
X_000E50_DynamicDNS.
Service.6
(message 13 in preceding illustration) contains
Value
<IPhostname>
(message 16 in preceding illustration) contains
Value
1
E-DOC-CTC-20071119-0003 v1.0