THOMSON Maxis TG784n User Manual
  1. Manuals
  2. Brands
  3. THOMSON Manuals
  4. Gateway
  5. TG784n
  6. User manual

THOMSON Maxis TG784n User Manual

Residential gateway
Hide thumbs Also See for Maxis TG784n:
Table of Contents

Advertisement

Quick Links

Download this manual
RESIDENTIAL
GATEWAY
Model TG784n
USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for THOMSON Maxis TG784n

Summary of Contents for THOMSON Maxis TG784n

  • Page 1 RESIDENTIAL GATEWAY Model TG784n USER MANUAL...

  • Page 2: Table Of Contents

    CONTENTS TECHINICAL SPECIFICATIONS HARDWARE SETUP LED BEHAVIOR INSTALLATION REQUIREMENTS EASY SETUP MANUAL SETUP WIRELESS CONFIGURATION PORT FORWARDING CONFIGURATION USB FILE SHARING USB PRINTER SHARING TROUBLESHOOTING RESET TO FACTORY DEFAULT RESIDENTIAL GATEWAY MODEL TG784N USER MANUAL | 2...

  • Page 3: Techinical Specifications

    TECHNICAL SPECIFICATIONS Hardware Specifications • Interfaces WAN RJ11 DSL line port 1 FXO POTS port (optional) Ethernet WAN 10/100 Base-T • Interfaces LAN 4-port autosensing 10/100 Base-T auto-MDI/MDI-X Ethernet switch 2 FXS POTS ports 2 USB 2.0 masters Wi-Fi IEEE 802.11b/g/n on board •...

  • Page 4: Hardware Setup

    Wireless Performance and Security • Wi-Fi IEEE 802.11b/g/n access point • Wi-Fi CERTIFIED ® • WPA™-Personal/WPA2™-Personal, WEP™ • Wi-Fi Multimedia (WMM ® • Wi-Fi Protected Setup (WPS™) • Up to 4 vitual SSID APs support • Security and service segregation per SSID •...

  • Page 5: Led Behavior

    LED BEHAVIOR Power LED Colour State Description Green Solid on Power on, normal operation Solid on Power on, self-test failed, indicating device malfunction Orange Blinking Bootloader active (during upgrade) Power off Ethernet LED Colour State Description Green Solid on Ethernet connection, no activity Blinking Ethernet activity No Ethernet connection...
  • Page 6 Phone LED Colour State Description Green Solid on VoIP service up Blinking VoIP activity VoIP service down Broadband LED Colour State Description Green Solid on DSL line synchronised Blinking Pending DSL line synchronisation No DSL line Internet LED Colour State Description Green Solid on...

  • Page 7: Installation Requirements

    INSTALLATION REQUIREMENTS Requirements • Your computer must run one of the following operating systems: Microsoft Window 7 or higher Microsoft Window 7 x 64 or higher Microsoft Window Vista (SP1) or higher Microsoft Window Vista x 64 (SP1) or higher Microsoft Window XP SP2 or higher Microsoft Window XP x 64 SP1 or higher Microsoft Window 2000 SP4...
  • Page 8 7. Easy Setup will appear, click Next to proceed. 8. Service Selection will appear, select your desired service and click Next. *Note: HSI(GPON) - Internet with No VoIP HSI(GPON) & VoIP - Internet with VoIP HIS(GPON), VoIP & IP Cam - Internet with VoIP and Static IP for Camera service.
  • Page 9 10. Input your Voice Account Telephone Number, User Name and Password. Click Next to proceed. 11. If you wish to change TG784n Access Control, please input new User Name and Password. Click Next to proceed. Note: TG784n is configured with 2 level access: 1.
  • Page 10 13. Please wait for the wizard to complete the configuration. 14. Done! You have successfully setup TG784n. Click Finish to close the wizard. BACK TOP RESIDENTIAL GATEWAY MODEL TG784N USER MANUAL | 10...

  • Page 11: Manual Setup

    MANUAL SETUP Proceed as follows: 1. Open your web browser. 2. Browse to http://dsldevice.lan or to the IP address of your TG784n (by default: 192.168.1.254) 3. The TG784n GUI appears. 4. Click on the eInternet to configure your user name and password. 5.
  • Page 12 6. To configure your VoIP settings, click on Toolbox. 7. In Toolbox click on Telephony. 8. In Telephony click on Configure. BACK TOP RESIDENTIAL GATEWAY MODEL TG784N USER MANUAL | 12...

  • Page 13: Wireless Configuration

    9. Input your VoIP account details and click Apply. *Note: SIP URI: same details as username. Display name: same details as username. Abbreviated number: leave it blank. Port: Select All to configure for both port FXS1 and FXS2. Otherwise select which port you would like to assign. WIRELESS CONFIGURATION Wireless connection If you want to connect your computer using a wireless connection, you will need a WiFi-certified wireless client...
  • Page 14 4. In Home Network click on WLAN. 5. In WLAN click on Configure. 6. Modify your desired settings and click Apply. BACK TOP RESIDENTIAL GATEWAY MODEL TG784N USER MANUAL | 14...

  • Page 15: Port Forwarding Configuration

    PORT FORWARDING CONFIGURATION To change TG784n Port Forwarding settings: 1. Open your web browser. 2. Browse to http://dsldevice.lan or to the IP address of your TG784n (by default: 192.168.1.254) 3. The TG784n GUI appears. And click on Toolbox. 4. In Toolbox click on Game & Application Sharing. 5.

  • Page 16: Usb File Sharing

    6. Select your application and device. Click Add and incoming request for the selected service will now be directed to the selected device. The TG784n will also configure the its firewall to allow this service. USB FILE SHARING Requirements Your USB storage device must be formatted as FAT32. Connecting your USB storage device to the Residential Gateway Proceed as follows: 1.
  • Page 17 Using the Network File Server Procedure 1. Open your web browser. 2. Browse to http://dsldevice.lan or to the IP address of your TG784n (by default: 192.168.1.254) 3. The TG784n GUI appears. And click on Toolbox. 4. On the Toolbox menu, click Content Sharing. 5.
  • Page 18 1. Open Windows Explorer. 2. In the address bar type two backslashes followed by the name that you entered in the Server Name box (in our example: \\Thomson). If you did not provide a server name, type \\192.168.1.253. 3. All storage devices that are attached to your Residential Gateway are listed as folders.
  • Page 19 2. The Connect To server window appears. 3. In the Server Address box, type smb://<servername>, where <server name> is the Server Name you assigned to your USB storage device. So in our example we will type smb://Thomson. If you did provide a server name, type smb://192.168.1.253 4.

  • Page 20: Usb Printer Sharing

    USB PRINTER SHARING Printing Sharing * Pre-requisite before the print server. 1. Connect the USB printer to the TG784n USB port. 2. You have the printer software loaded on the PC (OS 2K/XP/Vista and OS X). 3. The printing format used is RAW. Open Printer and Faxes and click on Add a printer Select Local printer and untick UPNP printer Select create a new port and select “...

Table of Contents