Advantech AIMB-Z50 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Computer Hardware
  5. AIMB-Z50
  6. User manual
Advantech AIMB-Z50 User Manual

Advantech AIMB-Z50 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
AIMB-Z50
中国自主化处理器,兆芯 KX-6000
平台 Micro-ATX 主板

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AIMB-Z50 and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech AIMB-Z50

Summary of Contents for Advantech AIMB-Z50

  • Page 1 User Manual AIMB-Z50 中国自主化处理器,兆芯 KX-6000 平台 Micro-ATX 主板...
  • Page 2 No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable.
  • Page 3 Whether your new Advantech equipment is destined for the labo- ratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known.
  • Page 4 Discard used batteries according to the manufacturer's instructions. 该设备运行需要满足以下两个条件:  本设备不会产生有害干扰。  本设备必须接受任何接收到的干扰，包括可能导致不希望的操作的干扰。 当设备在商业环境中运行时，这些限制旨在提供合理的保护，防止有害干扰。本设备 产生、使用和辐射射频能量，如果不按照说明书安装和使用，可能对无线电通信造成 有害干扰。在居民区操作本设备可能会产生有害干扰，在这种情况下，用户将被要求 自行纠正干扰，费用自理。建议用户，用户有权操作设备，但未经负责合规的一方明 确批准的任何设备变更或修改都将导致FCC法规的合规性失效。 警告 ! 如果安装不正确，新电池会有爆炸的危险。 请勿尝试充电、强制打开或加热电池。 用由制造商提供的相同或同等型号的电池更换电池。 根据制造商说明来丢弃旧电池。 AIMB-Z50 User Manual...
  • Page 5 Product Warranty (2 years) / 产品质量保证（两年） Advantech warrants the original purchaser that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products that have been repaired or altered by persons other than repair personnel authorized by Advantech, or products that have been subject to misuse, abuse, accident, or improper installation.
  • Page 6 It should be free of marks and scratches and in perfect working order upon arrival. As you unpack the AIMB-Z50, check it for signs of ship- ping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or it fails to meet the specifications, notify our service department or your local sales representative immediately.

  • Page 7: Table Of Contents

    GPIO Power Selection (VCCGPIO1) / GPIO 电源选择 ..16 Table 1.10:GPIO Power Selection (VCCGPIO1) / GPIO 电源选择 . 1.8.10 Caseopen Pin Header (JCASEOP_SW1) / Caseopen 开关 ..16 Table 1.11:Caseopen Pin Header (JCASEOP_SW1) / Caseopen 开 关..........16 1.8.11 COM1+COM2 Mode Setting by BIOS or Jumper (JCOM1+JCOM2) AIMB-Z50 User Manual...
  • Page 8 Auxiliary 4-pin Power Connector (ATX12V2) / 辅助4-pin 电源连接器 . 35 2.18 Low Pin Count Connector (LPC1) / LPC 连接器..... 36 Table 2.3: Advantech LPC Module List / 研华 LPC 模块列表 . 36 2.19 GPIO Connector (GPIO1) / GPIO 接口......36 2.20...
  • Page 9 Windows Driver Setup / Windows 驱动设置 ......78 Appendix A Programming the Watchdog Timer / 看门狗定时器编程 ....79 Watchdog timer overview / 看门狗定时器概述.......80 Programming the Watchdog Timer / 看门狗定时器编程 ....80 Table A.1: Watchdog timer registers.......... 82 A.2.1 Example Programs / 示例程序 ......82 AIMB-Z50 User Manual...
  • Page 10 B.24 Front Panel Audio Connector (FPAUD1) ..........101 Table B.27:Front Panel Audio Connector (FPAUD1) ....101 B.25 Watchdog Timer Output and HW Monitor Alarm (JWDT1+JOBS1)..101 Table B.28:Watchdog Timer Output and HW Monitor Alarm (JWDT1+JOBS1) ........... 101 AIMB-Z50 User Manual...
  • Page 11 Table B.37:ATX 12V Auxiliary Power Connector for CPU (ATX- 12V2) ..............104 B.35 Serial ATA (SATA1/SATA2/SATA3/SATA4) ......... 105 Table B.38:Serial ATA (SATA1/SATA2/SATA3/SATA4) ..105 B.36 SPDIF Audio Out Pin Header (SPDIF_OUT1) ........105 Table B.39:SPDIF Audio Out Pin Header (SPDIF_OUT1) ..105 AIMB-Z50 User Manual...
  • Page 12 AIMB-Z50 User Manual...

  • Page 13: Hardware Configuration / 硬件配置

    Chapter Hardware Configuration / 硬件配 置...

  • Page 14: Introduction / 介绍

    The motherboard supports KX-U6780A 2.7GHz/KX-U6580 2.5GHz processors and DDR4 2400/2666 memory up to 64 GB. AIMB-Z50 is equipped with one PCIe x16 (Gen3), two PCIe x4 (Gen3) and one PCI slot. Triple display interfaces are provided to allow users to connect monitors to the onboard VGA, DVI-D, and DP ports at the same time.

  • Page 15: Features / 特征

    Supports DDR4 2400/2666 UDIMM up to 64 GB  SUSI API: AIMB-Z50 supports SUSI 4.0 API which helps customers develop  their own remote management programs under Windows 10 and Linux. ...

  • Page 16: Specifications / 规格

    DDR4 2400/2666 U-DIMM. AIMB-Z50 supports non-ECC unbuffered DIMMs and does not support any memory configuration that mixes non-ECC with ECC unbuffered DIMMs.  内存：支持双通道 DDR4 2400/2666 U-DIMM，四个 288-pin 内存插槽，容量最 高支持 64 GB。AIMB-Z50 支持非 ECC 无缓冲内存，不支持任何将非 ECC 与 ECC 无缓冲内存混合的内存配置。 AIMB-Z50 User Manual...

  • Page 17: Input/Output / 输入/输出

    6 x USB 2.0 ports (4 rear, 2 via header), 1 x USB 2.0 internal Type- LPC: One LPC connector to support Advantech LPC modules, such as PCA-  TCM-CNB1 GPIO: AIMB-Z50 supports 8-bit GPIO from super I/O for general purpose con-  trol application ...

  • Page 18: Graphics / 显示

    、+V12_4P  功耗：兆芯 KX-U6780A@2.7GHz；DDR4 16 G x 4 Maximum: +12V at 0.28A, +5V at 4.63A, +3.3VATX at 1.83A, -12V at 0A, +5VSB at 0A, +V12_4P at 4.58A  尺寸（宽 x 高）：244 x 244 mm (9.6" x 9.6") AIMB-Z50 User Manual...

  • Page 19: Jumpers And Connectors / 跳线和连接器

    重量：1 kg (2.2 lb) Jumpers and Connectors / 跳线和连接器 Connectors on the AIMB-Z50 motherboard link it to external devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers that are used to configure your system for your application. The tables below list the function of each of the jumpers and connectors.
  • Page 20 LAN2 / USB 3.0 3, 4 LANLED1 Front Panel LAN indicator connector AUDIO1 Audio connector (Line-out, Mic-in) PCIEX16_1 PCIe x16 slot 1 (supports X8) PCIEX4_1 PCIe x4 slot 1 (supports X2) PCIEX4_2 PCIe x4 slot 1 (supports X4) PCI1 PCI 1 slot AIMB-Z50 User Manual...
  • Page 21 Figure 1.1 Jumper and Connector Locations / 跳线和连接器位置 VGA1 LAN2 COM1 LAN1 DVI1 USB3C1 AUDIO1 AUDIO2 USB3C2 USB2C1 Figure 1.2 I/O Connectors / I/O 连接器 Note! AIMB-Z50 is not compatible with the 1U chassis. AIMB-Z50 不兼容 1U 机箱。 AIMB-Z50 User Manual...

  • Page 22: Block Diagram / 框图

    Block Diagram / 框图 Figure 1.3 Block Diagram / 框图 AIMB-Z50 User Manual...

  • Page 23: Safety Precautions / 安全注意事项

    Replace the bat- tery only with the same or equivalent type recommended by the manu- facturer. Discard used batteries according to the manufacturer’s instructions. 如果安装不当，新电池有爆炸的危险。不要试图给电池充电、强行打开或 加热电池。仅用制造商推荐的相同或等效类型更换电池。根据制造商的说 明丢弃用过的电池。 AIMB-Z50 User Manual...

  • Page 24: Jumper Settings / 跳线设置

    1.8.2 CMOS Clear (JCMOS1) / 清除 CMOS The AIMB-Z50 motherboard contains a jumper that can erase CMOS data. Normally this jumper should be set with pins 1-2 closed. If you want to reset the CMOS data, set JCMOS1 to 2-3 closed for just a few seconds, and then move the jumper back to 1-2 closed.

  • Page 25: Watchdog Timer Output And Obs Alarm (Jwdt1+Jobs1) / 看门狗 定时器输出和 Obs 警报

    Watchdog Timer Output and OBS Alarm (JWDT1+JOBS1) / 看 门狗定时器输出和 OBS 警报 The AIMB-Z50 contains a watchdog timer that will reset the CPU. This feature means the AIMB-Z50 will recover from a software failure or an EMI problem. The JWDT1 jumper settings control the outcome of what the computer will do in the event the watchdog timer is tripped.

  • Page 26: Usb Power Source Switch Between +5V And +5V_Dual For Rear Usb Ports (Jusb_1) And Onboard Usb Ports (Jusb_2) / 后 Usb

    后 USB 接口（JUSB_1）和板载 USB 接口（JUSB_2）电源在 +5V 和+5V_DUAL 之间切换 AIMB-Z50 allows users to set USB power between +5 V_DUAL and +5 V. When the jumper is set as +5 V, the board doesn't support wakeup from S3 via keyboard or mouse.

  • Page 27: Onboard Buzzer Enable (Jfp1+Jfp2) / 板载蜂鸣器开启

    Onboard buzzer disable 7-10 open *default setting 1.8.8 Line-Out Voice Adjust (VOL_ADJ1) / Line-out 音量调整 Table 1.9: Line-Out Voice Adjust (VOL_ADJ1) / Line-out 音量调整 Function Jumper Setting *Default Voice (1-2), (4-5) closed Adjustable Voice Connect to tuner *default setting AIMB-Z50 User Manual...

  • Page 28: Gpio Power Selection (Vccgpio1) / Gpio 电源选择

    2-4 closed +V3.3SB *+V5_SB 1-3 closed +V3.3 4-6 closed 3-5 closed *default setting 1.8.10 Caseopen Pin Header (JCASEOP_SW1) / Caseopen 开关 Table 1.11: Caseopen Pin Header (JCASEOP_SW1) / Caseopen 开关 Function Jumper Setting *Normal 1-2 closed *default setting AIMB-Z50 User Manual...

  • Page 29: Com1+Com2 Mode Setting By Bios Or Jumper (Jcom1+Jcom2)

    Table 1.12: COM1+COM2 Mode Setting by BIOS or Jumper (JCOM1+JCOM2) / COM1+COM2 通过 BIOS 或跳线模式设定 Function Jumper Setting *RS232 (BIOS default) (1-2,3-4) short, 5-6 open RS485 with terminal-R (1-2,3-4) open, 5-6short RS485 (1-2,5-6) short, 3-4open RS422 1-2open, (3-4,5-6) short *default setting AIMB-Z50 User Manual...

  • Page 30: System Memory / 系统内存

    System Memory / 系统内存 AIMB-Z50 has four 288-pin memory sockets for DDR4 2400/2666 memory modules with maximum capacity of 64 GB (Maximum 16 GB for each DIMM). AIMB-Z50 only supports non-ECC DDR4 memory modules. Please note that AIMB-Z50 does NOT support registered DIMMs (RDIMMs).

  • Page 31: Connecting Peripherals / 连接外围设备

    Chapter Connecting Peripherals / 连接外围设备...

  • Page 32: Introduction / 介绍

    Parallel Port (LPT1) / 并口 The parallel port is normally used to connect the motherboard to a printer. The AIMB- Z50 includes an onboard parallel port, accessed through a 25-pin flat-cable connec- tor, LPT1. 并口通常用于将主板连接到打印机。AIMB-Z50 包括一个板载并口，通过 25-pin 扁平 电缆连接器 LPT1 接入。 AIMB-Z50 User Manual...

  • Page 33: Lan Port (Lan1, Lan2) And Usb Port

    They are supported by all major network operating systems. The RJ-45 jacks on the rear plate provide convenient 1000Base-T operation. The AIMB-Z50 provides 13 USB ports. USB2C1, USB11, and USB2H1 are USB 2.0 ports supporting transmission rates up to 480 Mbps. USB3C1 and USB3H1 are USB 3.1 Gen 1 ports supporting transmission rate up to 5 Gbps.

  • Page 34: Vga Connector (Vga1), Dvi-D Connector (Dvi1), And Displayport

    VGA Connector (VGA1), DVI-D Connector (DVI1), and DisplayPort Connector (DP1) / VGA, DVI-D 和 DP 接口 The AIMB-Z50 includes VGA, DVI-D, and DisplayPort interfaces that can connect display devices. Pin assignments are detailed in Appendix B. AIMB-Z50 包括 VGA、DVI-D 和 DP 端口接口,可以连接显示设备。引脚分配详见附录...

  • Page 35: Serial Port (Com1 ~ Com10) / 串口

    Serial Port (COM1 ~ COM10) / 串口 The AIMB-Z50 offers ten serial ports (one on the rear panel and nine onboard). COM1 and COM2 can be configured as RS-232/422/485 by jumper settings (see Chapter 1), and selecting the correct device mode for RS-485 under BIOS is neces- sary (see Chapter 3).

  • Page 36: External Keyboard And Mouse Connector (Kbms1) / 外接键盘和鼠标连接 器

    An optional PS/2 keyboard/mouse cable (P/N: 1700019268-11) and its bracket (P/N: 1960063434N000) must be assembled together and installed on the chassis rear PCI slot. Therefore, one expansion slot on the motherboard cannot be used. 可选的 PS/2 键盘/鼠标电缆（部件号：1700019268-11）及其支架（部 件号：1960063434N000）必须组装在一起，并安装在机箱后PCI插槽上。 因此，主板的一个扩展槽不能使用。 AIMB-Z50 User Manual...

  • Page 37: Cpu And System Fan Connector (Cpufan1, Sysfan1 ~ Sysfan3) / Cpu 和系统风扇连接器

    CPU and System Fan Connector (CPUFAN1, SYSFAN1 ~ SYSFAN3) / CPU 和系统风扇连接器 If a fan is used, this connector supports cooling fans that draw up to 500 mA (6 W). 如果使用风扇，此连接器支持最高 500 毫安（6 W）的冷却风扇。 AIMB-Z50 User Manual...

  • Page 38: Front Panel Connector (Jfp1, Jfp2, Jfp3) / 前面板连接器

    Front Panel Connector (JFP1, JFP2, JFP3) / 前面 板连接器 There are several external switches and LEDs to monitor and control the AIMB-Z50. 有几个外部开关和指示灯来监控 AIMB-Z50。 2.8.1 Power LED and Keyboard Lock (JFP3) / 电源指示灯和键盘锁 FP3 is a 5-pin connector for the power LED and keyboard lock. Refer to Appendix B for detailed information on the pin assignments.

  • Page 39: External Speaker (Jfp2 Pins 1, 4, 7, 10) / 外接扬声器

    2.8.2 External Speaker (JFP2 Pins 1, 4, 7, 10) / 外接扬声器 JFP2 is an 8-pin connector for an external speaker. The AIMB-Z50 provides an onboard buzzer as an alternative. To enable the buzzer, set pins 7-10 as closed. JFP2 是外部扬声器的 8-pin 连接器。AIMB-Z50 提供了一个板载蜂鸣器作为替代。要...

  • Page 40: Line-Out, Mic-In Connector (Audio1_Audio2) / Line-Out, Mic-In 连接器

    Line-Out, Mic-In Connector (AUDIO1_AUDIO2) / Line-Out, Mic-In 连接器 Line-Out can be connected to external audio devices like speakers or headphones. Mic-In can be connected to a microphone. Line Out 可以连接到外部音频设备，如扬声器或耳机。 Mic In 可以连接到麦克风。 AIMB-Z50 User Manual...

  • Page 41: 8-Pin Alarm Board Connector (Volt1) / 8-Pin 报警板连接器

    2.10 8-pin Alarm Board Connector (VOLT1) / 8-pin 报 警板连接器 VOLT1 connects to the alarm board on the Advantech chassis. The alarm board gives warnings if a power supply or fan fails, chassis overheats, or the backplane malfunctions. VOLT1 连接到研华机箱上的报警板。如果电源或风扇出现故障、机箱过热或底板损...

  • Page 42: Case Open Connector (Jcaseop_Sw1) / Case Open 连接器

    JCASEOP_SW1 is for chassis with a case open sensor. The buzzer on the mother- board sounds if the case is opened unexpectedly. The default function is disabled and pins 1-2 are bridged by a jumper cap. JCASEOP_SW1 适用于带有机箱开盖报警传感器的机箱。如果机箱被意外打开，主板上 的蜂鸣器则会报警。默认功能是 disabled，pins 1-2 由跳线帽桥接。 AIMB-Z50 User Manual...

  • Page 43: Front Panel Lan Indicator Connector

    2.12 Front Panel LAN Indicator Connector (LANLED1) / 前面板 LAN 指示连接器 Table 2.2: Front Panel LAN Indicator Connector / 前面板 LAN 指示连接器 LAN Mode Indicator LAN Link ON LAN Active Flash LAN Link Off AIMB-Z50 User Manual...

  • Page 44: Serial Ata Interface (Sata1 ~ Sata4) / Sata 接口

    2.13 Serial ATA Interface (SATA1 ~ SATA4) / SATA 接口 AIMB-Z50 features four high-performance serial ATA 3.0 interfaces (up to 600 MB/s) with long, thin, easy-to-run SATA cables. AIMB-Z50 具有四个高性能 SATA 3.0 接口（最高 600 MB/s），带有长而细且易于运 行的 SATA 线材。 AIMB-Z50 User Manual...

  • Page 45: Pci Slot (Pci1) / Pci 插槽

    AIMB-Z50 提供一个 32-bit / 33 MHz PCI 插槽。 2.15 PCIe x16 Expansion Slot (PCIEX16_1) / PCIe x16 扩展槽 The AIMB-Z50 provides a PCIe x16 (PCIe x8 signal) slot for users to install an add- on peripheral card for expansion requirements. AIMB-Z50 提供了一个 PCIe x16（PCIe x8 信号）插槽，供用户安装附加外围卡以满 足扩展需求。...

  • Page 46: Pcie X4 Expansion Slot (Pciex4_1, Pciex4_2) / Pcie X4 扩展槽

    2.16 PCIe x4 Expansion Slot (PCIEX4_1, PCIEX4_2) / PCIe x4 扩展槽 The AIMB-Z50 offers two PCIe x4 slots for users to install add-on cards for expansion requirements. AIMB-Z50 提供两个 PCIe x4 插槽，供用户安装附加卡以满足扩展需求。 注：PCIEX4_1 是 PCIe x2 信号。 AIMB-Z50 User Manual...

  • Page 47: Auxiliary 4-Pin Power Connector (Atx12V2) / 辅助4-Pin 电源连接器

    助4-pin 电源连接器 To ensure that enough power is supplied to the CPU, one auxiliary 4-pin power con- nector is available on the AIMB-Z50. ATX12V2 must be used to provide sufficient 12 V power to ensure the stable operation of the system.

  • Page 48: Low Pin Count Connector (Lpc1) / Lpc 连接器

    2.18 Low Pin Count Connector (LPC1) / LPC 连接器 The LPC connector on AIMB-Z50 is reserved for Advantech LPC modules. AIMB-Z50 上的 LPC 连接器是为研华 LPC 模块保留的。 Table 2.3: Advantech LPC Module List / 研华 LPC 模块列表 Description PCA-TCM-CNB1 TCM 2.0 module 2.19...

  • Page 49: Smbus Connector (Smbus1) / Smbus 接口

    2.20 SMBus Connector (SMBUS1) / SMBus 接口 AIMB-Z50 User Manual...
  • Page 50 AIMB-Z50 User Manual...

  • Page 51: Bios Operation / Bios 操作

    Chapter BIOS Operation / BIOS 操作...

  • Page 52: Introduction / 介绍

    This chapter introduces the basic information of the BIOS menu and how to use the AIMB-Z50 series BIOS Setup program. With the AMI BIOS Setup program, you can control specific functions of the computer through the BIOS Setup menu. The setup program has multiple menus and sub-menus.

  • Page 53: Entering Bios Setup / 进入 Bios 设置

    Power on the computer, press the <DEL> key on the post interface to enter the AMI BIOS Setup program. In the BIOS main interface, you can enter the sub-menu through <ENTER> to determine the options. 打开计算机电源，按 post 界面上的提示信息，按 <DEL> 键进入 AMI BIOS 设置程 序。在BIOS 主界面中，可以通过 <ENTER> 进入子菜单来确定选项。 Figure 3.2 POST AIMB-Z50 User Manual...

  • Page 54: Main Menu

    Use this option to change the system time and date. Highlight System Time or System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow> keys to move between fields. The date AIMB-Z50 User Manual...

  • Page 55: Advanced Bios Features Setup

    3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the AIMB-Z50 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU configuration, to go to the sub-menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
  • Page 56 3.2.2.1 Trusted Computing Figure 3.5 TPM Settings Security Device Support  Enable/Disable Security Device. NOTE: Your Computer will restart in order to change the state of the device. 启用/禁用 BIOS 支持安全设备。注意：更改设备状态系统需要重启。 AIMB-Z50 User Manual...
  • Page 57 "Auto”, “S1 only” or “S3 only” ACPI Sleep State. 选择 APCI 睡眠状态：自动/只有 S1/只有 S3。 Lock Legacy Resources  Enable or Disable Lock Legacy Resources. 启用/禁用锁定传统资源。 S3 Video Repost  Enable or Disable S3 Video Repost. 启用/禁用 S3 唤醒后显卡自检。 AIMB-Z50 User Manual...
  • Page 58 3.2.2.3 NCT6106D Super IO Configuration This option allows the user to view and configure the SIO configuration. 该选项允许用户查看和设置 SIO 配置。 Figure 3.7 NCT6106D Super IO Configuration Figure 3.8 Serial Port 1 Configuration AIMB-Z50 User Manual...
  • Page 59 Options are similar to Serial Port 3. 参照串行端口 3。 Serial Port 5 Configuration  Options are similar to Serial Port 3. 参照串行端口 3。 Serial Port 6 Configuration  Options are similar to Serial Port 3. 参照串行端口 3。 AIMB-Z50 User Manual...
  • Page 60 Figure 3.10 Parallel Port Configuration Parallel Port Configuration  – Parallel Port Enable or Disable Parallel Port. 启用/禁用并行端口。 – Device Mode Parallel Port could be selected as "STD Printer Mode" or other settings. 选择并行端口的模式，默认是标准打印机模式。 AIMB-Z50 User Manual...
  • Page 61 VIN voltages are updated dynamically based on the hardware. 此页面显示用于监控系统硬件状态的各种参数。风扇数量和 VIN 电压根据硬件动态更 新。 Figure 3.11 PC Health Status Case Open Warning  Enable or Disable the Chassis Intrusion monitoring function. When it is enabled and the case is opened, the speaker beeps. 开启或关闭机箱入侵监测功能。打开该功能，当监测到机箱被打开，蜂鸣器会报 警。 AIMB-Z50 User Manual...
  • Page 62 Fan will work with this Manual PWM Value. 当风扇模式选择为手动模式时，该选项显示。手动设置风扇 PWM 值，使风扇按 此 PWM 运行。 Smart SYSFan2 Mode – Select Smart SYSFan2 Mode. 智能风扇 SYSFan 2 模式选择。默认为手动模式。 Manual PWM Setting  Fan will work with this Manual PWM Value. 当风扇模式选择为手动模式时，此选项显示。手动设置风扇 PWM 值，使风扇按 此 PWM 运行。 AIMB-Z50 User Manual...
  • Page 63 NCT5104DSEC Super IO Configuration Figure 3.13 Second Super IO Configuration AIMB-Z50 supports 2nd super IO NCT5104D COM 1~4. This page of the BIOS menu is to set the respective serial port configuration. AIMB-Z50 支持第二颗 super IO NCT5104D COM 1~4。BIOS 菜单的这一页用于设置...
  • Page 64 Refer to Serial Port 1 Configuration. 参照串行端口 1 设置。 Serial Port 3 Configuration  Refer to Serial Port 1 Configuration. 参照串行端口 1 设置。 Serial Port 4 Configuration  Refer to Serial Port 1 Configuration. 参照串行端口 1 设置。 AIMB-Z50 User Manual...
  • Page 65 3.2.2.6 Fintek F75387 Hardware Monitor Figure 3.15 Fintek F75387 Hardware Monitor This page monitors System Fan 3. 该页面监测系统风扇 SYSFAN3 转速。 AIMB-Z50 User Manual...
  • Page 66 Figure 3.16 CPU Configuration CPU Threshold low value  Controls options for temperature threshold. 设置 CPU 温度阈值低值。 CPU Threshold high value  Control options for temperature threshold. 设置 CPU 温度阈值高值。 AVX Supported  AVX Supported. 开启或关闭 AVX 支持。 AIMB-Z50 User Manual...
  • Page 67 This is a workaround for OSs without EHCI hand-off support. The EHCI owner- ship change should be claimed by the EHCI driver. 此项是为无 EHCI 接管支持的操作系统的替代方法。EHCI 拥有者变更需要由 EHCI 驱动声明。 USB Mass Storage Driver Support  Enable or Disable USB Mass Storage driver support. 启用/禁用 USB 大容量存储设备的支持。 AIMB-Z50 User Manual...
  • Page 68 Compatibility Support Module (CSM) configuration. Compatibility Support Module (CSM) 提供允许基于 UEFI 的固件支持 legacy PC 启动过程的服务。此页面允许用户查看和配置 Compatibility Support Module (CSM) 配置。 Figure 3.18 CSM Configuration CSM Support  Enable or Disable CSM Support. 启用或禁用 CSM 支持。默认设置为 [Enabled]。 AIMB-Z50 User Manual...
  • Page 69 Select the execution mode of Storage. 此项用于选择 UEFI 和传统存储 OpROM 的执行模式 Video  Select the execution mode of Video. 此项用于选择 UEFI 和传统显卡 OpROM 的执行模式。 Other PCI Devices  Select the execution mode of Other PCI devices. 此项用于决定网络、存储或显卡之外的其它设备的 OpROM 执行模式 AIMB-Z50 User Manual...
  • Page 70 3.2.2.10 Network Stack Configuration Figure 3.19 Network Stack Configuration Figure 3.20 Network Stack Enable AIMB-Z50 User Manual...
  • Page 71 PXE Boot Wait Time Wait time in seconds to press ESC key to abort the PXE boot. 设置按下 ESC 键以中断 PXE 启动的等待时间。 – Media Detect Count Number of times the presence of media will be checked. 设置检查媒体的次数。 AIMB-Z50 User Manual...

  • Page 72: Chipset

    3.2.3 Chipset Figure 3.21 Chipset This page provides information for the chipset on AIMB-Z50. 本页提供 AIMB-Z50 chipset 的信息。 AIMB-Z50 User Manual...
  • Page 73 3.2.3.1 North Bridge Figure 3.22 North Bridge DRAM Configuration  Displays memory information. 显示内存信息。 Figure 3.23 DRAM Configuration AIMB-Z50 User Manual...
  • Page 74 选择显存大小。可以选择 64 MB、128 MB、256 MB、512 MB and 1024 MB，或者选 择 自动模式，系统会自动给显卡分配足够显存。 Primary Graphics Adapter  Select Primary Graphics Adapter. 选择主显卡。 Integrated Graphics (UMA)  Enable or Disable Integrated Graphics (UMA). 启用/禁用集成显卡。 AIMB-Z50 User Manual...
  • Page 75 3.2.3.2 South Bridge Figure 3.25 South Bridge Users can configure the South Bridge parameters. 用户可以设定南桥配置。 AIMB-Z50 User Manual...
  • Page 76 USB Configuration Figure 3.26 South USB Configuration USB S4 WakeUp Control  USB S4 Wake Up Enable/Disable selection 启用/禁用 USB S4 唤醒功能。 USB OC Enable/Disable  USB OC Enable/Disable selection. 启用/禁用 USB 过流保护功能。。 AIMB-Z50 User Manual...
  • Page 77 3.2.3.3 IOE Setup Figure 3.27 IOE Setup Users can configure IOE parameters. 用户可以设定 IOE 配置。 AIMB-Z50 User Manual...
  • Page 78 选择 SATA IDE/AHCI 模式。注意：要与硬盘安装系统时的 SATA 模式对应，改 变该设置可能会导致进不了系统。 Force SATA Speed setting  Force SATA speed setting to Gen1/Gen2/Gen3. 锁定 SATA 速率为 Gen1/Gen2/Gen3。 AHCI Port Hot-Plug Cap  Enable AHCI HotPlug Capability for all ports. 启用/禁用 AHCI hotplug 功能。 AIMB-Z50 User Manual...
  • Page 79 Figure 3.29 IOE USB Drive Setup USB S4 WakeUp  Enable or Disable USB S4 Wake Up. 启用/禁用 USB S4 唤醒功能。 IOE USB OC Enable  Enable or Disable IOE USB OC function. 启用/禁用 IOE USB 过流保护功能。 AIMB-Z50 User Manual...

  • Page 80: Security

    Security Figure 3.30 Security Select Security Setup from the AIMB-Z50 Setup main BIOS setup menu. All Security Setup options, such as password protection are described in this section. To access the sub-menu for the following items, select the item and press <Enter>.

  • Page 81: Boot

    Quiet Boot  Enable or Disable the Quiet Boot option. When enabled, the BIOS logo will show in place of the POST screen. 此项允许用户启用/禁用 Quiet Boot。当启用时，开机自检界面会被 BIOS logo 取代。 Boot Option Priorities  Set the boot order. 设置启动顺序。 AIMB-Z50 User Manual...

  • Page 82: Save & Exit

    1. Select Discard Changes and Exit from the Exit menu and press <Enter>. The following message appears: Quit without saving? [Yes] [No] 2. Select Yes to discard changes and exit. 选择此项将退出设置且不保存对系统配置的任何修改。 1.请从退出菜单中选择“Discard Changes and Exit” 并按下 <Enter> 键。 屏幕上将出现以下信息： Discard Changes and Exit Setup Now? AIMB-Z50 User Manual...
  • Page 83 Restore default values for all setup options. 为所有设置值恢复/加载默认值。 Save as User Defaults  A set of specific configuration changes can be saved for future use as user defaults. 将更改保存为用户默认设置。 Restore User Defaults  Restore User defaults to all the setup options. 恢复为所有设置选项的用户默认设置。 AIMB-Z50 User Manual...
  • Page 84 AIMB-Z50 User Manual...

  • Page 85: Graphics Device Setup

    Chapter C-960 Graphics Device Setup / C-960 Graphics 驱动设 置...

  • Page 86: Before You Begin / 安装前

    Before You Begin / 安装前 To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the AIMB-Z50 are located on the Advantech support website (http://www.advantech.com/support). Before you begin, it is important to note that most display drivers need to have the relevant soft- ware application already installed on the system prior to installing the enhanced dis- play drivers.

  • Page 87: Windows Driver Setup / Windows 驱动设置

    Windows Driver Setup / Windows 驱动设置 Enter the Advantech support website, then search for the product name AIMB-Z50. There you can see the "Graphics" driver available. 进入研华科技网站，然后搜索产品 AIMB-Z50。你可以在里面看到“Graphics”驱动 程序。 AIMB-Z50 User Manual...
  • Page 88 AIMB-Z50 User Manual...

  • Page 89: Usb 3.0 Device Setup / Usb 3.0 驱动设置

    Chapter USB 3.0 Device Setup / USB 3.0 驱动设置...

  • Page 90: Introduction / 介绍

    Win7 32- and 64-bit installations require installation of the USB 3.0 driver. Win 7 32 & 64 位需要安装 USB 3.0 驱动程序。 Windows Driver Setup / Windows 驱动设置 Enter the Advantech support website, then search for product name AIMB-Z50. There you can see the "USB 3.0" driver available. 进入研华科技网站，然后搜索产品 AIMB-Z50。里面可以看到“USB3.0”驱动。...

  • Page 91: Programming The Watchdog Timer

    Appendix Programming the Watchdog Timer / 看门狗定时器编程...

  • Page 92: Watchdog Timer Overview / 看门狗定时器概述

    The AIMB-Z50’s watchdog timer can be used to monitor system software operations and take corrective action if the software fails to function within the programmed period. This section describes the operation of the watchdog timer and how to pro- gram it.
  • Page 93 AIMB-Z50 User Manual...

  • Page 94: Example Programs / 示例程序

    ;----------------------------------------------------------- Mov al,07h; Select registers of the watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;----------------------------------------------------------- Dec dx; Enable the function of the watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al AIMB-Z50 User Manual...
  • Page 95 Dec dx ; Enable the function of the watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------- Dec dx ; Set minute as counting unit Mov al,0f0h Out dx, al Inc dx In al,dx Or al, 08h AIMB-Z50 User Manual...
  • Page 96 Dec dx ; Enable watchdog timer to be reset by mouse Mov al,0f2h Out dx,al Inc dx In al,dx Or al,80h Out dx,al ;----------------------------------------------------------- Dec dx ; lock NCT6106D Mov al,0aah Out dx,al Enable watchdog timer to be reset by keyboard AIMB-Z50 User Manual...
  • Page 97 Mov al,87h Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of the watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;----------------------------------------------------------- Dec dx ; Enable the function of the watchdog timer Mov al,30h AIMB-Z50 User Manual...
  • Page 98 Dec dx ; Generate a time-out signal Mov al,0f2h Out dx,al ; Write 1 to bit 5 of F2 register Inc dx In al,dx Or al,20h Out dx,al ;----------------------------------------------------------- Dec dx ; lock NCT6106D Mov al,0aah Out dx,al AIMB-Z50 User Manual...
  • Page 99 AIMB-Z50 User Manual...
  • Page 100 AIMB-Z50 User Manual...

  • Page 101: I/O Pin Assignments

    Appendix I/O Pin Assignments / I/O Pin 分配...

  • Page 102: Parallel Port (Lpt1)

    Parallel Port (LPT1) Table B.1: Parallel Port (LPT1) Signal Signal LPT1_STB#_R LPT1_AFD# LPT1_PD0_R LPT1_ERR# LPT1_PD1_R LPT1_INIT# LPT1_PD2_R LPT1_SLIN# LPT1_PD3_R LPT1_PD4_R LPT1_PD5_R LPT1_PD6_R LPT1_PD7_R LPT1_ACK# LPT1_BUSY LPT1_PE LPT1_SLCT AIMB-Z50 User Manual...

  • Page 103: Lan Port (Lan1, Lan2)

    LAN Port (LAN1, LAN2) Table B.2: LAN Port (LAN1, LAN2) Signal Signal ACTLED# MDI2+ a_ACT MDI2- EEDO_LINK1000# MDI3+ EESK_LINK100# MDI3- COMG MDI0+ MDI0- MDI1+ MDI1- Table B.3: USB 3.1 Port (USB3C1, USB3C2) Signal STDA_SSRX- STDA_SSRX+ Shield GND_DRAIN STDA_SST- STDA_SSTX+ AIMB-Z50 User Manual...

  • Page 104: Usb 2.0 Port (Usb2C1, Usb11)

    USB 2.0 Port (USB2C1, USB11) Table B.4: USB 2.0 Port (USB2C1, USB11) Signal USB 3.1 Header (USB3H1) Table B.5: USB 3.1 Header (USB3H1) Signal Signal STDA_SSRX STDA_SSRX+ STDA_SSTX- STDA_SSTX+ STDA_SSTX+ STDA_SSTX- STDA_SSRX+ STDA_SSRX- AIMB-Z50 User Manual...

  • Page 105: Usb 2.0 Header (Usb2H1)

    USB 2.0 Header (USB2H1) Table B.6: USB 2.0 Header (USB2H1) Signal Signal VGA Connector (VGA1) Table B.7: VGA Connector (VGA1) Signal Signal GREEN BLUE VGA_P11 VGA_P4 DDAT FOC_ON DCLK AIMB-Z50 User Manual...

  • Page 106: Dvi-D Connector (Dvi1)

    Signal Signal TMDS0_D2- TMDS0_D2+ VCC_TMDS TMDS0_HPD TMDS0_D0- TMDS0_DDC_SCL TMDS0_D0+ TMDS0_DDC_SDA TMDS0_D1- TMDS0_D1+ TMDS0_CLK+ TMDS0_CLK- DisplayPort Connector (DP1) Table B.9: DisplayPort Connector (DP1) Signal Signal DDI_CPU_DP1_b_TX0+ DDI_CPU_DP1_b_TX3- DDI_CPU_DP1_b_TX0- DP1_AUX_EN# DDI_CPU_DP1_b_TX1+ DP1_AUX+ DDI_CPU_DP1_b_TX1- DDI_CPU_DP1_b_TX2+ DP1_AUX- DP1_HPD_CN DDI_CPU_DP1_b_TX2- DDI_CPU_DP1_b_TX3+ +V3.3_DP1 AIMB-Z50 User Manual...

  • Page 107: Rs-232/422/485 & Rs-232 Interface (Com1~ Com10)

    RS-232/422/485 & RS-232 Interface (COM1~ COM10) Table B.10: RS-232/422/485 DB-9 Connector (COM1) Signal DCD_422TX- RXD_422TX+ TXD_422RX+ DTR_422RX- DSR# RTS# CTS# Table B.11: RS-232/422/485 Header (COM2) Signal DCD_422TX- DSR# RXD_422TX+ RTS# TXD_422RX+ CTS# DTR_422RX- AIMB-Z50 User Manual...

  • Page 108: External Keyboard/Mouse Connector (Kbms1)

    Table B.13: External Keyboard and Mouse Connector (KBMS1) Signal KB_CLK_B KB_DAT_B MS_DAT_B +V5_KBMS1_F MS_CLK_B B.11 CPU and System Fan Power Connector (CPUFAN1, SYSFAN1 ~ SYSFAN3) Table B.14: CPU and System Fan Power Connector (CPUFAN1, SYSFAN1 ~ SYSFAN3) Signal +12 V Detect PWMOUT AIMB-Z50 User Manual...

  • Page 109: Power Led And Keyboard Lock (Jfp3)

    Table B.15: Power LED and Keyboard Lock (JFP3) Signal POWER_LED+ KEYLOCK# B.13 External Speaker Connector (JFP2) Table B.16: External Speaker Connector (JFP2) Signal FRP_SPK1 FRP_SPK2 FRP_SPK3 FRP_SPK4 B.14 HDD LED Connector (JFP2) Table B.17: HDD LED Connector (JFP2) Signal +3.3V FRP_SATALED_B# AIMB-Z50 User Manual...

  • Page 110: Smbus Connector (Jfp2)

    SMBus Connector (JFP2) Table B.18: SMBus Connector (JFP2) Signal SMB_SNMP_SDAT SMB_SNMP_SCLK B.16 ATX Soft Power Switch (JFP1) Table B.19: ATX Soft Power Switch (JFP1) Signal PANSWIN# PWRBTN#_GND B.17 Reset Connector (JFP1) Table B.20: Reset Connector (JFP1) Signal SRST_IN# AIMB-Z50 User Manual...

  • Page 111: 8-Pin Alarm Board Connector (Volt1)

    Case Open Connector (JCASEOP_SW1) Table B.22: Case Open Connector (JCASEOP_SW1) Signal SIO_CASEOP B.20 Front Panel LAN Indicator Connector (LANLED1) Table B.23: Front Panel LAN Indicator Connector (LANLED1) Signal Signal LAN1_ACTLED# LAN2_ACTLED# +V3.3_LAN1_CN +V3.3_LAN2_CN LAN1_LED1_1G# LAN2_LED2_1G# LAN1_EESK_LINK100# LAN2_EESK_LINK100# +V3.3SB AIMB-Z50 User Manual...

  • Page 112: Low Pin Count Connector (Lpc1)

    LPCAD2 LPC1_SMB_CLK SERIRQ LPC1_SMB_DAT +V5_SB B.22 GPIO Connector (GPIO1) Table B.25: GPIO Connector (GPIO1) Signal Signal GPIO0 GPIO4 GPIO1 GPIO5 GPIO2 GPIO6 GPIO3 GPIO7 +VCC_GPIO B.23 SMBus Connector (SMBUS1) Table B.26: SMBus Connector (SMBUS1) Signal SMBCK SMBDT AIMB-Z50 User Manual...

  • Page 113: Front Panel Audio Connector (Fpaud1)

    Watchdog Timer Output and HW Monitor Alarm (JWDT1+JOBS1) Table B.28: Watchdog Timer Output and HW Monitor Alarm (JWDT1+JOBS1) Signal Signal SIO_WG# SIO_IRRX SRST_IN# SIO_BEEP SIO_IRTX OBS_BEEP B.26 ATX/AT Connector (PSON1) Table B.29: ATX/AT Connector (PSON1) Signal VCCAT +V3.3SB VCCATX AIMB-Z50 User Manual...
  • Page 114 +V5_SB +V3.3SB VCC_GPIO VCC_GPIO +3.3V B.28 CMOS Connector (JCMOS1) Table B.31: CMOS Connector (JCMOS1) Signal VBAT RTCRST# B.29 Line out Voice Adjust Connector (VOL_ADJ1) Table B.32: Line-Out Voice Adjust Connector (VOL_ADJ1) Signal FRONT-OUT-L LINOUT_L GND_A LINOUT_R FRONT-OUT-R AIMB-Z50 User Manual...
  • Page 115 Table B.34: USB Rear Port Power Enable Selection (JUSB_1) & USB ON Board Power Enable Selection (JUSB_2) Signal USB power PG_ATX B.32 COM1 & COM2 Mode Select (JCOM1 & JCOM2) Table B.35: COM1 & COM2 Mode Select (JCOM1 & JCOM2) Signal Signal COM_M0 COM_M1 COM_M2 AIMB-Z50 User Manual...
  • Page 116 Table B.36: ATX 24-pin Main Power Connector for System (EATXPWR1) Signal Signal +3.3VATX +3.3VATX +3.3VATX -V12 SPS_PS_ON#_R PG_a_ATX +V5SB +V12 +V12 +3.3VATX B.34 ATX 12V Auxiliary Power Connector for CPU (ATX12V2) Table B.37: ATX 12V Auxiliary Power Connector for CPU (ATX12V2) Signal Signal +V12_4P +V12_4P AIMB-Z50 User Manual...
  • Page 117 B.35 Serial ATA (SATA1/SATA2/SATA3/SATA4) Table B.38: Serial ATA (SATA1/SATA2/SATA3/SATA4) Signal I_PEXPHYB_TX+ I_PEXPHYB_TX- I_PEXPHYB_RX- I_PEXPHYB_RX+ B.36 SPDIF Audio Out Pin Header (SPDIF_OUT1) Table B.39: SPDIF Audio Out Pin Header (SPDIF_OUT1) Signal +V5_SPDIF SPDIF-OUT AIMB-Z50 User Manual...
  • Page 118 No part of this publication may be reproduced in any form or by any means, such as electronically, by photocopying, recording, or otherwise, without prior written permission from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2022...

Table of Contents