Xerox DOCUPRINT N4525 Advanced Features And Troubleshooting Manual page 42

Control Panel Menus
Ethernet Menu Items (cont'd.)
AppSocket Enabl Sets the Ethernet AppSocket protocol. The AppSocket in the printer
supports ports 2000, 9100, and 2501.
Values:
AppSocket PDL Sets the default Print Description Language emulation for the Ethernet
AppSocket interface.
Values:
AppSocket Bin PS Sets the AppSocket binary mode of PostScript.
Values:
ETalk Enable Sets the Ethernet EtherTalk protocol.
Values:
HTTP Enable Sets the Ethernet HTTP Server protocol.
Values:
Auto IP Address Enables/disables the generation of an IP address by the printer if the DHCP
server does not respond with an IP address.
Values:
IP Address Res Sets the method used to resolve (assign) the IP address, including Sub Net
Mask and Default Gateway.
Values:
IP Address Sets the four byte IP address. (This menu item only appears if
Res
Values:
Note: Once the control panel shows
Value keys (labeled 3 or 7) to scroll to the desired value at the cursor
location. To move the cursor, use the Item keys (labeled 2 or 6). Thus, you
can change characters within the address rather than having to re-enter the
entire address.
26
On (default)
Off
Auto (default)
PCL
PostScript
On
(default)
Off
(default)
On
Off
(default)
On
Off
(default)
On
Off
Static
BOOTP/RARP
DHCP (default)
is set to static .)
xxx.xxx.xxx.xxx
where xxx = 000 to 255
on the top line, use the
IP Address
DocuPrint N4525 Network Laser Printer
IP Address