C H A P T E R 1
About your interactive flat panel
Infrared remote control
The infrared remote control enables you to turn on and turn off your interactive flat panel, change the
input source, adjust the volume, access the on-screen menu and more. For more information on the
infrared remote control, see Using the infrared remote control on page 32.
Left side view
The left side of your interactive flat panel has the
menu control panel and the side terminal panel.
Menu control panel
The menu control panel enables you to access the on-screen display menu to adjust display and
audio settings. For more information on the on-screen display menu, see Adjusting video settings
with the on-screen display menu on page 79.
USB receptacle
The USB receptacle takes a USB type A connector, such as a USB memory drive. For more
information on this receptacle, see Using the USB receptacle on page 48.
N O T E
You can disable this USB receptacle so a computer cannot access it. For instructions, see
Disabling the USB receptacle on the side terminal panel on page 22.
Side terminal panel
The side terminal panel has USB and HDMI receptacles for connecting a guest laptop. For more
information on the side terminal panel, see Connecting a guest laptop on page 51.
Back view
The back of the interactive flat panel includes the bottom terminal panel, the inside terminal panel, the
speaker wire connections and the appliance (for SMART Board 8055ie-SMP interactive flat panels
only).
6
smarttech.com/kb/170177