SMART Board SBID 8055i User Manual page 71

C H A P T E R 7
Maintaining your interactive flat panel
To remove the interactive flat panel
1. Turn off your interactive flat panel and unplug the power cable from the wall outlet.
2. Remove all accessible cables and connectors.
W A R N I N G
Do not move the interactive flat panel by connecting a rope or wire to the handles on the
o
back. The interactive flat panel can fall and cause personal injury and product damage.
3. There are two lifting handles on the back of the interactive flat panel, one on each side. With one
person on each end, use one hand each on the handle to support the weight of the interactive flat
panel and the other hand on the upper side to balance it during lifting. The interactive flat panel
weighs about 98 lb. (44.5 kg).
4. Lift your interactive flat panel from its mounting location.
C A U T I O N
Do not allow the weight of the interactive flat panel to rest on the color select module
o
because it is not designed to support product weight.
Do not leave the interactive flat panel face up, face down or upside down for an extended
o
period of time as it could cause permanent damage to the screen.
Do not place the interactive flat panel on a sloping or unstable cart, stand or table,
o
because the interactive flat panel could fall, resulting in injury or severe product damage.
63 smarttech.com/kb/170177