Chapter 6: Using Guest Laptops With Your Interactive Flat Panel; Connecting A Guest Laptop - SMART Board SBID 8055i User Manual

Chapter 6
Using guest laptops with your
interactive flat panel

Connecting a guest laptop

Using a SMART GoWire cable
Connecting computer 2
Connecting a guest laptop
You can connect a guest laptop to the side terminal panel of the interactive flat panel. When a guest
laptop is connected, the laptop's desktop is displayed on the interactive flat panel and touch
interactivity is enabled. For a diagram of the various computer options, see Connecting computers to
your interactive flat panel on page 18.
I M P O R T A N T
The guest laptop must have SMART Product Drivers installed. If it does not, you will need to
connect the laptop to the interactive flat panel using a SMART GoWire cable. If you purchased an
SBID8055i-SMP or SBID8055ie-SMP model, you can use the supplied SMART GoWire cable to
connect your guest laptop to the interactive flat panel. For more information, see Using a
SMART GoWire cable on the next page.
51 smarttech.com/kb/170177
51
52
54