Introduction - Patton electronics SmartNode 4520 Series Getting Started Manual

Model 4520 & 4110 Series Getting Started Guide

Introduction

The factory configuration settings for SmartNode 4110 Series devices are as follows:
#----------------------------------------------------------------#
#
# 4110 Series
# Factory configuration file
#
#----------------------------------------------------------------#
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4
system
ic voice 0
low-bitrate-codec g729
context ip router
interface eth0
ipaddress dhcp
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
port ethernet 0 0
medium auto
encapsulation ip
bind interface eth0 router
no shutdown
Introduction
VoIPon www.voipon.co.uk sales@voipon.co.uk
D • SmartNode 4110 Series factory configuration
#
#
#
#
Tel: +44 (0)1245 808195
81
Fax: +44 (0)1245 600030