Access The Command Line Interface - Patton SmartNode 4520 Series Quick Start Manual

1. In the Discovery Tool window, select the IP address of your SmartNode.
Right-click the selected line, and select Telnet .
2.
3. In the telnet window, enter the username administrator . At the password
prompt simply press the enter key. The SmartNode will respond by display-
ing its IP address as the command line prompt.
4. After you log in your SmartNode will be running in operator execution
mode (indicated by > character in the command line prompt). To enter con-
figuration mode, use the commands enable and configure.
10.10.22.50>enable
10.10.22.50#configure
10.10.22.50(cfg)#
You may now start to configure the SmartNode from scratch using the CLI com-
mands, but we recommend that you start your configuration from a template. See
section 5.0 "Download a configuration example, adapt it to your network, and
load it onto the SmartNode"
For a detailed description of the CLI refer to the SmartWare Software Configura-
tion Guide (SCG) available on the CD-ROM and online at
www.patton.com/voip.
6
www.voipon.co.uk

4.0 Access the Command Line Interface

on page 7 for further details.
sales@voipon.co.uk
SmartNode 4520 and 4110 Quick Start Guide
Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030