Table of Contents
Advertisement
SN4554 Getting Started Guide
Introduction
This chapter leads you through the basic steps to set up a new SN4554:
•
Start the SN4554 Discovery Tool (see section
•
Access the Web Browser (GUI) Interface (see section
page 25)
•
Configuring your SN4554 (see section
This section describes how to quickly access the configuration interface of a SN4554 and give an overview of
the different elements you can configure. For detailed information on all configuration parameters refer to the
SmartWare software configuration guide.
1. Start the SmartNode Discovery Tool
The SmartNode discovery tool provides a quick and easy way to access the management interfaces residing
within your SN4554. The tool identifies any Patton VoIP devices installed on your network and displays the
model number, IP address and MAC address of each unit.To use the discovery tool, do the following:
1. Insert the CD included with your SN4554 into the CD drive on your PC.
2. Copy the file named SNDiscovery.exe from the CD to your PC.
3. At your PC, double-click the SNDiscovery.exe file name to activate the tool. The SmartNode Discovery
Tool window will display the IP Address, MAC Address, Device Type (model number) and Build (software
release) of your SN4554.
If your SN4554 does not appear:
•
Make sure the SN4554 and your PC are on the same routed subnet
•
Make sure any firewall programs on your PC are disabled
2. Access the Web Browser (GUI) Interface
The SN4554 provides a web-browser-based graphical user interface (GUI) that makes it easy to configure,
monitor and manage your SN4554. To access the web-browser interface, do the following:
1. In the SmartNode Discovery Tool window, select the line that displays the IP address of your SN4554.
Introduction
"1. Start the SmartNode Discovery Tool"
"3. Configuring your SN4554"
Figure 8. SmartNode Discovery Tool window
4 • SN4554 initial configuration
"2. Access the Web Browser (GUI) Interface"
on page 27)
on page 25)
on
25
Advertisement
Table of Contents
