Hardware Setup - Infinite Peripherals DPP-250 User Manual

HARDWARE SETUP

M em ory Switch Settings
Step 1. Make sure the printer is OFF (ERR LED is OFF) before performing
step #2.
Step 2. Press and hold power (LF) button. The ERR LED flashes red /
green every second.
Step 3. Release the (ON) button in about 6 sec. and wait for the printer
to print out the current memory settings. Follow the printer
instructions to make the necessary changes.
The Pressing LF (YES) – confirms changes.
The pressing on/OFF (No) – cancels changes.
Note: Care must be taken when changing factory preset configuration
information.
USER MANUAL | 16